login   |    register

Scale Modeling Sponsors

See Your Ad Here!

All in Resine [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
Winterketten
Winterketten Chain PzKpfw III (Left) (AK5003)
  • move

by: Mario Matijasic [ MAKI ]

Introduction:

During the WW2 the Germans had several approaches to improve the maneuverability of their tanks in the winter time, Winterketten (winter tracks) being one of those solutions. Developed in 1942 for use in winter conditions on the Eastern Front, Winterketten were basically a normal track with a thin triangular veined blade extension that protruded from the side end of the track. However, the Winterketten track proved flawed under hard use as the extensions could break off into the hinge point causing track failure. A new type of track called Ostketten of the same width but an extra hinge point succeeded Winterketten in the fall and winter of 43-44.

Review:

All in Resine offers several different sets of Winterketten in 1/35 scale, available as 3 or 5-link, right or left side track sets. This review covers Winterketten Chain PzKpfw III (Left) (AK5003).

The set is packed in a simple zip-lock bag with a CAD box art image showing the Winterketten track segment, designating the contents as 5 left side track links. The set consists of five 3D printed pieces representing one initial winterketten link with pin and four intermediate links in 1/35 scale. With 5 links, this set is not designed as a full track replacement, but instead as an accessory track section for models.

One of the main drawbacks with 3D printed pieces are printing lines, surface imperfections resulting from the printer adding material to the piece one layer at the time. These can be tedious to clean and the procedure can easily result in fine details getting lost. All in Resine uses state-of-the-art 3D printer with 16 micron per layer resolution, thus reducing printer deficiencies to a minimum. Indeed, the printing lines on these winterketten pieces are miniscule and visible only under high magnification. The tracks fit nicely to one another and can be assembled without using glue in the process.

Closer inspection of the pieces reveals a very complex track shape perfectly delivered. Iím far from being an expert in WW2 tracks, but a quick comparison of these pieces with the reference images shows a very nice and accurate representation of the Winterketten track in scale.

Conclusion:

Winterketten Chain PzKpfw III (Left) is a 1/35 scale set consisting of five 3D printed winterketten track links. The shape of the track link is nicely delivered in scale. The print is very good, with minimal printing imperfections. The track assembles easily even without using glue.

Altogether, this set is a welcomed addition for all those modeling WW2 German armor.

Click here for additional images for this review.

SUMMARY
Highs: Printed well and easy to assemble.
Lows: None.
Verdict: Highly recommended.
  Scale: 1:35
  Mfg. ID: AK5003
  Related Link: All in Resine website
  PUBLISHED: Mar 19, 2017
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 93.37%
  MAKER/PUBLISHER: 0.00%

Our Thanks to All in Resine!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Mario Matijasic (Maki)
FROM: CROATIA HRVATSKA

You wonder how did this addiction start? I was a kid when my dad broght home a 1/72 Concord airplane; we built it together as well as couple of other airplanes after that. This phase was just pure fun: glue, paint, decals in no particular order... everything was finished in a day or two. Then I disc...

Copyright ©2017 text by Mario Matijasic [ MAKI ]. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

price?
MAR 19, 2017 - 07:43 AM
All in Resine website lists these at 2.50 EUR. Mario
MAR 19, 2017 - 08:30 AM
Only 5 links per set?? Doesn't matter how nice they are, at that rate the cost to add a full set of them to the tracks on a StugIII for example, would be way out of my range.
MAR 20, 2017 - 03:17 AM
They are supposed to be used as spare tracks, hence the tiny amnount of links in a set.
MAR 20, 2017 - 05:53 AM
Oops! Should have read more closely. A thousand apologies, effendi!
MAR 20, 2017 - 11:22 AM
While these are always a welcome addition you'd need to offer a good -and complete- set of Ostketten to get my wallet open. And why only a couple of links? That seems a needless and pricey tease.
MAR 24, 2017 - 01:33 PM
Tip: Just hit enter to sumbit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move