LIVE RESIN [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
135
US SOF GMV Turret Gunner
US MARSOC Marine Special Operations Battalion/Navy Seals GMV-M turret gunner (LRM-35012)
  • move

by: Mario Matijasic [ MAKI ]

Introduction:

Live Resin released their first 1/35 scale resin figures back in 2013. Designed and produced using CAD software and 3D rapid prototyping, these miniatures initiated a revolution in the hobby receiving very positive feedback throughout the modeling community.

It is now 2017 and with their latest batch of figures, the company pushes forward to produce even more realistic miniatures. This review covers US MARSOC Marine Special Operations Battalion/Navy Seals GMV-M turret gunner (LRM-35012), one of the most impressive figures in Live Resin’s portfolio so far.

Review:

The set is packed in a hard cardboard box. The box features two CAD box art images; the one on the front shows a very cool depiction of the figure in a GMV turret manning a M2 .50 Cal Machine Gun, while the one on the back displays the figure in more detail, with a recommendation to use it with GMV Hexagon turret (LRE-35291 - LRE-35293). Inside the box is a zip-lock back containing the pieces, additionally protected within a layer of bubble wrap.

The set consists of 19 resin parts organized on several carrier blocks. The resin looks great and the cast is absolutely perfect. Did you notice a tiny microphone boom among all the pieces? I have never seen such a microscopic piece cast in resin. Amazing! The level of detail is very impressive all around and although the company always offered super-high-quality resin cast I think this figure kit shows a step up to the next level for Live Resin quality.

The figure depicts Special Ops operator checking the perimeter from the GMV turret, with his weapon ready for any sign of hostile activity. The anatomy of the figure looks good with the facial features nicely defined. The figure wears Crye Precision Gen2 AC Combat Shirt and Pants, the uniform of choice for US Special Forces. An assortment of ammo magazine, utility, radio and hydration pouches are attached to his LBT-6094 plate carrier. The Lowa Zephyr GTX boots, tactical gloves, shades and a long beard add to the Special Ops feel of the figure.

Assembly:

There are no assembly instructions in the set, so it is up to the modeler to deduce which piece goes where. Main figure parts are a no brainer, but some assistance might be needed with the equipment pieces. Most of the equipment is cast separately and there are various possibilities of attaching the pouches and obtaining slightly different rig setup, but I decided to follow the box art images for assembling the review sample figure.

I annotated the pieces on their carrier blocks and I’m also displaying photos of major subassemblies, noting the position of each part. I started by fixing the main figure pieces. These are all designed featuring protrusions and indentations, which help to position the corresponding pieces optimally. I attached the torso to the legs first, followed by both boots and left arm. I had to use a bit of putty to fill a minute gap between the torso and legs. I then fixed the equipment pieces to the tactical vest. The MBITR pouch was attached first, in order to align the radio to the wire already sculpted on the vest. Perfect fit! I fixed the ammo magazine and utility pouches to the lower front of the vest, a tiny strobe light to the right shoulder, and a hydration carrier to the back. Finally, a super-delicate Thales antenna was fixed to the MBITR. The helmet was fitted to the head, but I omitted the tiny microphone reducing the possibility to damage the piece while handling the miniature. In fact, I would suggest leaving the microphone off until all the figure painting is done. The assembly was finished by attaching the head and the right arm to the torso.

As the name of the set suggests, the figure is designed to fit GMV Hexagon turret. I did a test fit and it works really well. To fix the M2 weapon system to the figure, it is necessary to cut off the right side of M2 spade grips and fit the right hand to the machine gun. After all is done, the complete setup looks absolutely amazing.

Conclusion:

US MARSOC Marine Special Operations Battalion/Navy Seals GMV-M turret gunner (LRM-35012) from Live Resin is an amazing figure. The resin is absolutely perfect, I would even say a step up from the usual high-quality standard of the company. The figure goes together without any problems and builds into a really impressive rendition of the US Special Forces operator.

The figure fits well to the GMV Hexagon turret and M2 Machine Gun produced by Live Resin, with the entire setup easily turning into a focal point on any GMV model in 1/35 scale.
SUMMARY
Highs: An absolutely great figure. Perfectly cast and easy to assemble, it realistically depicts US SF operator in scale.
Lows: None.
Verdict: A must have. Highly recommended.
  Scale: 1:35
  Mfg. ID: LRM-35012
  Related Link: Live Resin website
  PUBLISHED: Jun 08, 2017
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 93.37%
  MAKER/PUBLISHER: 93.95%

Our Thanks to Live Resin!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Mario Matijasic (Maki)
FROM: CROATIA HRVATSKA

You wonder how did this addiction start? I was a kid when my dad broght home a 1/72 Concord airplane; we built it together as well as couple of other airplanes after that. This phase was just pure fun: glue, paint, decals in no particular order... everything was finished in a day or two. Then I disc...

Copyright ©2021 text by Mario Matijasic [ MAKI ]. All rights reserved.



Comments

WOW ! This is the nicest resin figure I've ever seen ! It makes me want to get the kit just to display the figure ! AWESOME work Live Resin !!! BTW, What kit would work with this figure ? Thanks in advance ! Tom
JUN 07, 2017 - 06:30 PM
Super review, Mario. I have been thinking of adding one to a future HUMVEE build but worry that I would need additional figures who would not be as nice, haha!
JUN 07, 2017 - 10:27 PM
Mario, the figure looks fantastic. The details are so very sharp. The pose is also very realistic looking. I know this isn't a review of the turret, but those windows look very foggy. Regards, Eric
JUN 07, 2017 - 11:03 PM
What a great-looking figurine! If I was building a MUMVEE anytime soon its what I'd want.
JUN 08, 2017 - 07:07 AM
Hello, first time see this fog on glasses, probably it a some problem with this party of transparent resin. I will solve question with much fog of glasses in next days and inform.
JUN 08, 2017 - 11:12 PM
Why keep on saying the same weird line about your fogged-up glasses? You posted the same elsewhere which makes me wonder...
JUN 09, 2017 - 11:32 PM
Opps! It looks like I was -erroneously- claiming that I wanted to build a "Mumvee". Ar! Ar! Obviously HUMVEE. Suitably embarrassed. Damned auto-correct.
JUN 11, 2017 - 08:58 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT