AFV CLUB [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
EOD Tactical Robot
TALON EOD Tactical Robot
  • move

by: Evan [ CYCLONES6 ]

Background

TALON is a powerful, lightweight, versatile robot designed for missions ranging from reconnaissance to weapons delivery. Its large, quick-release cargo bay accommodates a variety of sensor payloads, making TALON a one robot solution to a variety of mission requirements. Built with all-weather, day/night and amphibious capabilities standard, TALON can operate under the most adverse conditions to overcome almost any terrain. The suitcase-portable robot is controlled through a two-way RF or F/O line from a portable or wearable Operator Control Unit (OCU) that provides continuous data and video feedback for precise vehicle positioning.

TALON’s payload and sensor options include: multiple cameras (color, black and white, infrared, thermal, zero light), a two-stage arm, gripper manipulators, pan/tilt, two-way communications, NBC (nuclear/biological/chemical) sensors, radiation sensors, UXO/countermine detection sensors, grenade and smoke placing modules, breaching tools, communications equipment, distracters and disrupter's.

The TALON robot is also used for bomb disposal. It is operated by radio frequency and equipped with four video cameras that enable troops to determine which areas enemy soldiers occupy. In addition, the TALON is waterproof up to 100 feet, allowing it to search for explosives off-land.

The Talon began helping with military operations in Bosnia in 2000, deployed to Afghanistan in early 2002 and has been in Iraq since the war started, assisting with improvised explosive device detection and removal. Talon robots had been used in about 20,000 missions in Iraq and Afghanistan by the end of 2004.

The Kit

The AFV Club kit is simply one small sprue packaged on a card with instructions on the front and back. It should be noted that AFV Club does not call their EOD tactical robot a TALON, but it is indeed a version of the TALON robot upon further inspection of the parts. The instructions have you start by assembling the main body of the robot, and then have you attach the sprocket and track assembly. The tracks are molded onto the sprockets. This means that the robot will not be movable; however, this type of molding most likely saves a lot of frustration for the modeler. In any case, careful painting will be needed in this area.

The next step has you assemble the extendable arm of the TALON. The main arm parts are molded in one piece, but lights and other small pieces are attached to them in this step. You also add the claw in this step. AFV Club gives you two options here: an open claw, and a closed claw. This is a nice touch if you are using the robot in a diorama.

Step three has you attach a series of cameras and antennas on the main body of the robot. The two major arm pieces are put together here, and then attached to the main body. There is a special note telling the builder not to glue some of these parts; making the arm movable. This is another great feature when being used in a dio. There is also a paint note that advises the modeler to paint the main body semi gloss black or yellow. I have never seen a yellow TALON robot, and it would be best to consult your own references on painting. Luckily, there is an endless amount of TALON photos out there.

I would also like to add that the sprue itself is labeled W and has kit no. AF35132 M1132 on it. This means that while being sold separately, this robot was originally designed to go in AFV Club’s upcoming M1132 Stryker kit. Time will tell if it is indeed included with the Stryker, but as of now it looks like a yes.

Another point that should be made is that there is no control unit or case included. These would enhance the overall kit, but are not a must have.

Conclusions

This is a nice little kit that has endless uses in a diorama scenario, and should be very welcomed by modern armor fans. I cannot speak too much into the accuracy of this kit, but there are no evident flaws after a quick examination of the sprue.

HIGHLY RECOMMENDED.

Introduction by: Shachtman, Noah. "TALON Small Mobile Robot." Blog. Web. 28 May 2010.

Additional photos by: Jim Starkweather, from sample provided by AFV Club.
SUMMARY
Highs: Claw options, and movable arm is a plus.
Lows: Tracks are molded onto sprockets. No control unit or case is included.
Verdict: A great kit of an unusual topic.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: AC35010
  Suggested Retail: $6 (eBay)
  PUBLISHED: Jun 18, 2010
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.00%
  MAKER/PUBLISHER: 89.68%

About Evan (cyclones6)
FROM: ILLINOIS, UNITED STATES

Copyright ©2021 text by Evan [ CYCLONES6 ]. All rights reserved.



Comments

This kit is now available at Luckymodel for $6.29 Shipped: http://www.luckymodel.com/scale.aspx?item_no=AF%20C35010 Thank You for adding the additional photos, Jim! Evan
JUN 18, 2010 - 08:03 AM
Very nice review and photography Evan: thanks. I'm looking forward to seeing your completed one. Given it's size that should be in about an hour! I think this will look good sitting on the tailgate of a helmet-top Humvee. The movable arm is a nice feature.
JUN 18, 2010 - 08:35 AM
Yesterday I got The TALON EOD .I mounted the machine gun from the Stryker upgrade set from AFV CLUB . The up-graded armed version is called SWORD. I put an Insurgent from Masterbox IRAQ set 2 ( the one crouched down peeking around the corner), staring straight into the gun barrel,very effective. Let´s see when I get around to painting it all but it looks good.
SEP 23, 2010 - 09:21 PM
I'd like to see pics of that dio
SEP 24, 2010 - 02:27 AM
Came across one of these in the LHS the other day and started it that evening. The build is simple and straight forward. I've left the runner/tracks off until after painting. My only complaint is that the plastic for the arm joints is way too fine and broke at both joins so now it's glued in one position. Not a major issue, just something to note. Has anyone else done one?
NOV 27, 2010 - 11:46 AM
Nice review. To answer the last question, I purchased one from Colpar Hobbies in Aurora a few months ago, but have not had time built it yet. I did, however, do this one last year. As there are two different styles of track, I may stick with mine for the Cougar at any rate. Mine scaled out pretty well to the AFV Club one, so I guess theirs must be pretty accurate.
NOV 27, 2010 - 11:56 AM
Nice review Evan. Thank you. I got one of these a few months ago off of Ebay for $5.00. Nice little kit. But I emphasize, LITTLE. Teeny, tiny parts make this one a carpet monster's delight. A fun kit though that went together well and only took an hour or so, without paint. Robert, what brand are the ones you built, or are they scratchbuilt?
NOV 28, 2010 - 03:13 AM
Completed! A fun little build....
DEC 06, 2010 - 01:24 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT