PERFECT SCALE MODELLBAU [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
PSM M149A1 Water Trailer
M149A1
  • move

by: Bill Cross [ BILL_C ]

introduction

While many modelers just want to build tanks and the other "stars" of the motor pool, I like the supporting cast as much, if not more.

And since soldiers get thirsty, a "water buffalo" is as much a part of any convoy or advance fire base as is the latest Main Battle Tank or armored personnel carrier. The United States military has usually done a pretty good job of logistics, and so "water buffaloes" are important for the health and functionality of the troops.

The M149 water trailer was introduced by the Army in 1960, and has served with US ground forces continuously up until probably the present day (I can't find anything that says it has been taken out of service, though troops are often supplied with boxes of bottled water nowadays). With a total gross weight of 1.5 tons, it's an easy pull for the 2 1/2 ton or 5 ton trucks such as the M923.

Perfect Scale Modelbau has released three resin versions of the M149, and the M149A1 can work in dioramas from Vietnam through NATO right down to today (especially in NATO camouflage).

kit contents

Inside PSM's usual white cardboard box are:

2 Ziploc baggies containing 76 light gray resin parts
1 solid resin water tank
1 small fret of PE with 5 pieces
4 page 8 1/2 x 11 color instruction sheet

the review

The M149A1 in this kit can be built either in the static or mobile position, so if you want to show it on the move, you can. Other than some extra wire for handles, the kit comes with everything you'll need except markings (which most photos show to be minimal at best). The resin feels a bit greasy, and PSM recommends treating it with a de-greaser to remove any mold release agent, but the casting is crisp and mostly without any flash in the review sample we received except with smaller parts as would be expected.

The company also made what I consider an excellent decision in casting the body of the water tank as a solid piece of resin. While this undoubtedly increased the overall weight of the kit (making it more expensive to ship), the likelihood of having to replace crushed parts is nil. In addition, modelers will not be plagued with lining up components and "truing them up."

The construction looks pretty straightforward, with the trailer chassis and the support front wheel assembly providing the most challenges. Some of the grab handles broke off their pour plugs in shipment, but they can be easily replaced with thin wire (and will probably yield more satisfaction and less cursing). Still, I give PSM high marks for including virtually everything, rather than leaving modelers to scratch the handles as many resin makers would.

Overall, the casting, as with all other PSM kits and conversion sets I've handled is excellent. There is a tiny amount of flash around the edges of the tires, but nothing that a little sanding won't take care of. As always, take care when working with resin, and be sure to wear a face mask or wet the area you're working on to cut down on resin dust.

Painting instructions are not provided, other than the options of olive drab, Masster Tarnung ("MASSTER camouflage, from "Modern Army Sensor Systems Test, Evaluation and Review"), and the MARDEC pattern. Check your references.

conclusion

I'm glad to see PSM working their way through the various items in the NATO arsenal. This piece will work in almost any situation from Vietnam to the present. The company also offers the earlier M149 and the later M149 A2 versions.

Thanks to Perfect Scale Modelbau for providing this review sample. Be sure to mention you saw it reviewed here on Armorama when ordering.
SUMMARY
Highs: Superb, sharp casting. One-piece water tank can't be crushed in shipping or by modeler. All the essential details.
Lows: Expensive, and not for the beginner.
Verdict: Highly recommended for NATO, Vietnam or possibly even Middle East & Afghanistan scenarios. Check your references before deciding.
Percentage Rating
93%
  Scale: 1:35
  Mfg. ID: 35077
  Suggested Retail: €30.50
  PUBLISHED: Dec 12, 2012
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.08%
  MAKER/PUBLISHER: 87.69%

Our Thanks to Perfect Scale Modellbau!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Bill Cross (bill_c)
FROM: NEW JERSEY, UNITED STATES

Self-proclaimed rivet counter who gleefully builds tanks, planes and has three subs in the stash.

Copyright ©2021 text by Bill Cross [ BILL_C ]. All rights reserved.



Comments

Thanks Bill. Just one remark : one of the pictured instruction pages shows the earlier M149 trailer (the water tank shape is a giveaway ) Frenchy
DEC 12, 2012 - 05:16 AM
Thanks, Frenchy, I checked the instructions in the kit and they say "M149," so I don't know if the two kits share a set of build instructions and parts or not. I'll see what I can learn from PSM.
DEC 12, 2012 - 06:37 AM
I built the A2 trailer recently..and all I can say is your in for an enjoyable build! The casting was flawless, and instructions excellent.I wish plastic kits assembled that well! The only addition was a set of hooks from MR Modelbau, I'm hoping for the cargo trailer for Christmas!
DEC 12, 2012 - 01:21 PM
Nice one Bill. I like the one piece frame and the solid tank, well thought out and should be a pleasure to build. If its anything like PSM's M332 ammo trailer it should look sweet when finished
DEC 12, 2012 - 04:03 PM
Thanks, Jeff, it looks like the usual high-quality PSM kit. Thanks, too, James, I think this could be a fun item to drop into almost any post-WW2 diorama.
DEC 13, 2012 - 02:38 AM
Hi all, the M149 A2 is still in widespread service with the US Army. Each company has a 5ton truck towing an M149 A2. I build three of these beauties `til now. There are neverteless two negative points. The biggest drawback is the shape ot the faucet boxes. These are much to narrow. there size is 17mm by 9 mm by 5.5 mm. I widened mine to 17 mm by 9 mm by 8.5 mm. The other thing lacking are the combined tie-down/lifting hooks for a current model M149 A2. Nevertheless a very useful and versatile kit. I only hope tha one company will do a M1102 LTTH trailer soon. Hans-Hermann
DEC 13, 2012 - 04:44 AM
Thanks, Hans-Hermann, for the information. I checked with PSM, and the instructions are the same for both kits to save production costs.
DEC 13, 2012 - 05:02 AM
How about a PLS M1074 w/trailer and M989a1 heavy expanded mobility ammunition trailer for a Hemitt
DEC 13, 2012 - 04:51 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT