AFV CLUB [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
AFV Club M2 machine guns
AFV Club US M2HB 0.50 cal machine gun set with M3 tripod & M63 AA mount
  • move

by: Sean Langley [ PIGSTY ]

Introduction

The M2 0.50” machine-gun scarcely needs an introduction. Nearly a hundred years since it was designed, it’s still being manufactured and has only just officially become the M2A1 variant. The vast majority of M2s are the M2HB (heavy barrel) version, air-cooled with - in most applications - a characteristic short perforated sleeve at the breech end and a carrying handle slung underneath. They’ve appeared everywhere: in aircraft wings and turrets, on the roofs of almost every US military vehicle (and a fair few others too), and in many ground-firing and anti-aircraft set-ups. Over 3 million have been made and production shows no sign of stopping.

The M2’s ubiquity means that it appears in large numbers of armour and infantry kits. Usually you get a fairly basic pintle and a gun that might comprise five or six parts. Some are better than others, but moulding limitations have usually meant that they lack finesse. Most importantly, the barrel and sleeve (short or long) will generally be in one piece and the perforations just indentations. There are ways round this. Brass replacement barrels are one; another is to buy a resin-and-photo etched kit that will drive you mad with how fiddly they are but should come out absolutely cracking. AFV Club has slipped into the market with a slightly different approach for some of the M2’s WW2 uses.

Review

The first difference between this set and many others is that you can build two quite different guns from it. In fact, there are more options than that, although only two can come out of the available parts. Those options are -
Guns:
short sleeve with plain muzzle
short sleeve with flash suppressor
long sleeve with plain muzzle
Mounts:
Vehicle pintle (two types)
M3 tripod
M63 AA mount

The reason this translates into two complete guns is that the long-sleeved version is moulded with the barrel and half the breech in one piece, while the short-sleeved version is a single breech-plus-sleeve with a choice of barrels.

Almost all of this new set is injection-moulded polystyrene, with only two tiny PE frets for the finer details. There are 80 plastic and 14 photo etched brass parts. The sprue that carries the gun barrels uses multi-part moulds to give open muzzles and a very fine rendition of the short sleeve, on which all four rows of perforations go all the way through. The long sleeve, being solid, relies on dimples for its perforations, and some of them are deeper than others. In this respect it’s still a little way short of some of the brass barrels on the market.

The gun breeches both come in three parts - although, while the top covers are separate, the insides don’t have the detail to allow you to depict a gun being loaded. There are two pairs of firing handles for the different breeches, a cocking handle for one (the other’s is moulded into it), and a choice of sights that are assembled out of the PE brass. It’s a little confusing but there seems to be one large ring-and-bead for AA work and either a smaller ring or a pair of beads for other work. The AA bead sits on a complicated mount that’s folded out of a single piece of PE with three PE nuts added; there’s also some microscopic rolling of parts for other features. So if you like eye-watering and fiddly, this set won’t disappoint! There’s also a choice of ammunition boxes, with two styles of feed, and matching holders. The instructions don’t say how these attach but if you know your way round the M2 you can probably spot it with no trouble.

The M3 tripod comes either folded or deployed (using alternative trailing legs) and has two rear feet and a different front foot, all separate. There’s also a rear stay for the underside of the breech that you use only in this application.

The M63 mount has seven parts for the central post and three for each of the four legs, plus twelve for the trigger group (you use only ten, the choice depending whether you want them stowed or deployed). Another PE part goes with the deployed triggers, though the instructions say nothing about it when they’re folded away. You can’t assemble the triggers so that they remain moveable, and the same applies to the legs, although with surgery it might at least be possible to fix them folded away for carriage.

One feature is hard to explain. If you use the long-sleeved gun on the M63, the instructions tell you to omit a group of parts that connects the trigger group to the back of the pintle. These parts are, so far as I can tell, always featured on the M63 installation, as an integral part of linking the triggers to the mount, so it’s not obvious why only one style of gun is meant to have them. In addition, where the instructions show this group assembled, they feature a small stay linking this group to the pivot for the triggers, which doesn’t seem to be included in the assembly. One of the PE parts is absent from the instructions, but this doesn’t appear to be it. However, I’m not familiar enough with this set-up to know for certain; if anyone wants to chip in, you’ll be more than welcome. I’m also not completely happy about the order of assembly here - it seems to have you inserting one small, delicate group between two others and hooking one end over something else. Dry-fitting would be a wise move.

The standard of moulding is very high. All parts are crisp with few ejector pin marks, and most of those can probably be ignored as they’ll be hidden. The finer parts make good use of extensions for the pins to keep the parts clean. There’s a little bit of flash, and you’ll want to watch that some of the location pins’ holes might need opening out. Unfortunately there are also fine mould seams on all the sprues. These should scrape away easily enough, but with so many round parts there will be a lot of scraping to do, and even the flat-section parts have been cut into both sides of the mould so that they have their share of seams too. One other small niggle is that one box’s exposed ammunition has links while the other doesn’t. The brass is fine and clean, and the ring sights are a joy to behold. In fact the main problem will probably be keeping them flat.

Conclusion

It’s tempting to see this set as slightly over-engineered. Five parts for a single ammunition box is a lot compared with the more basic items that tend to be provided with armour kits. But that’s pretty much inevitable to reach this degree of detail.
SUMMARY
Highs: Good detail, careful attention to differences between types of gun
Lows: Possible errors and omissions; lots of minor cleaning up to do
Verdict: A good set with interesting options not found elsewhere - readily recommended.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: AF35246
  Suggested Retail: £12.99
  PUBLISHED: May 09, 2013
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.50%
  MAKER/PUBLISHER: 89.68%

Our Thanks to AFV Club!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Sean Langley (pigsty)
FROM: NO REGIONAL SELECTED, UNITED KINGDOM

Copyright ©2021 text by Sean Langley [ PIGSTY ]. All rights reserved.



Comments

Two different things. the flash supressor is just that, a flash supressor: The blank firing adaptor for the M2 looks like this: AFAIK the M2 doesn't use wooden bullets, just blank casings with the tip sealed. The adaptor is used so the gas system work properly. M2 blanks: http://www.defenseimagery.mil/imagery.html#a=search&s=DF-ST-86-07829%20&chk=6cfe0&guid=1c225d82b963e528562bf038d9b0541e78a0bc9c http://www.defenseimagery.mil/imagery.html#a=search&s=DF-ST-86-07911%20&chk=6cfe0&guid=a9ebc25a456d81130e25992ebf01122380771837 And thx for the review Sean! Cheers /E
MAY 08, 2013 - 10:18 PM
Zapper is correct. The flash suppressor for the M2HB is a rather goofy looking item which is an afterthought..it mates to the front of the barrel and is held on with 4 long thin bolts that tighten a collar that used a split ring to cinch against that big wad of steel at the muzzle. It looks terrible, and frankly does little at night to "suppress" the muzzle flash. The blank fire adapter is even worse. Since the M2 won't function without the barrel recoiling to the rear, some gizmo had to be created to "choke" the muzzle and contain the blast of the blank, driving the barrel to the rear so the gun will cycle and reload itself. Since the barrel has to move to do this, the gizmo is that horrible thing with the big muzzle cap and 4 long rods running way back to the barrel support. Ugly.
MAY 08, 2013 - 11:50 PM
Unless there's no separate part for the tip of the barrel, the open muzzle of the aircraft variant seems quite too big. Or is it a modern version that is different?
MAY 09, 2013 - 12:15 AM
LINK yup, that is wrong. Here's a photo of the M3 guns in a B17 ball turret. The recoiling barrel slides in the barrel support bushing at front of the perforated jacket and protrudes from the front a bit. The bore size of this gun is 1/2", that's the size hole that should be there, unless there is a muzzle tip on the sprue we are not seeing. That being possible, I'll wait until I get mine and unbox it to render final judgement.
MAY 09, 2013 - 01:42 AM
Does someone knows if a company is building this in 1/35: GAU-21 Basically, it's a M2 "advanced" http://www.youtube.com/watch?v=G2SIbXksH_U
MAY 16, 2013 - 03:16 AM
Just a quick note. The .50 cal doesn't have a "gas system", it is recoil operated so the blank firing adapter has to allow the pressures in the barrel to build up such that the kinetic energy of the blank's gas jet coming out the front is sufficient to drive the barrel back and simulate the recoil motion of a proper firing. Paul
MAY 16, 2013 - 04:33 PM
The kit does not look to bad. Spade grips look a bit "funky". Most of the old guns we had did have the flash suppressor on them, but I haven't seen one yet on a QCB version. "EDIT" Disregard my last, just found a couple of photos. I never used that type of BFA with the long rods. Then again we never did do much in the way of blank firing. Mostly live fire all the time. However, here is the type of BFA we use for the QCB.
MAY 17, 2013 - 05:17 AM
GAU-21 is based on the M3 aircraft gun with many improvements..to my knowledge, the major supplier for this is FN-Herstal, but I do have a friend who builds a version at his weapon shop in Wisconsin (Central Wisconsin Armory) called the M50 Dragon, which the US is buying as door guns for CH-47 Chinook helos. Fire rate is around 1200 rpm, and the stellite lined chrome chambered barrels are the only reason that works..a standard steel barrel would melt after a long burst like that video shows! I don't know of any 1/35 kit of this gun and mount yet..But I'd expect if there's a CH-47 or Sea Stallion kit in 1/35 with a tail ramp gun, that's the one.
MAY 18, 2013 - 01:00 AM
Well, thank you Gary. Couple of things I ignored, well, in fact, there's a tons of things I ignore but I'll go to bed less dumb tonight, thank's to you LOL. PLz, if you ever hear something about a 1/35 version, try to remember old me. I sure would love a couple of them. I love the look and I can't stop thinking about Live-Resin quality of M2 and how the GAU-21 would look if they ever decide to make one. Or two LOL Take care Gary Marc
MAY 18, 2013 - 02:41 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT