Campaigns: Completed Campaigns
Campaigns that are completed should be grouped here.
Hosted by Richard S.
The Other Guys!
goofmuilwijk
Visit this Community
Zuid-Holland, Netherlands
Joined: April 19, 2013
KitMaker: 179 posts
Armorama: 117 posts
Posted: Saturday, August 05, 2017 - 02:32 AM UTC
It took a while to get the little Wz painted. After first airbrushing the car green, i then tried to get the camouflage pattern on it. This turned out to be easy enough, but the road to that conclusion was a bit more difficult.

The camouflage pattern comes from: http://derela.republika.pl/wz34.htm
First i tried to draw the pattern with a pencil. I did that on one side of the car. Then i brush-painted the colors. This didn't cover well. So after 2 layers i decided there had to be a better way. Since the camo-colors have a black demarcation line between them, i thought i could just airbrush them on. A little overspray wouldn't be too hard to cover up with the black line. This didn't turn out very well. I overestimated my airbrush skills a bit. That and Mig's ammo didn't fire from my gun as well as i thought it would

In the end, i just masked the pattern with kneadable eraser. This worked remarkably well. The yellow took about an hour to mask and 15 minutes to spray. The grey took half an hour to mask and about 10 minutes to spray. On a positive note, it built up my confidence with this masking procedure a lot

For the demarcation lines i used a fine-liner felt pen. In retrospect i should have used the fine one, instead of the medium one. But on the test piece the medium looked better.

The decals (all 2 of them) suffered from age and a very thin carrier film. Never had it happen before, but only one survived. The other sort of disintegrated and couldn't be saved. Ah well, a bit if dust and it won't show. I think...

In the end, i'm not entirely happy with it, but not very disappointed either

So, this is how the little armoured car stands now. The wheels are still loose, the groudwork is unpainted but primed
(which actually looks cool)





And yes: no brown. I read on the Wz. 34 page that the pattern likely consisted of yellow, green and light blue-grey. On the linked page it looked like the camouflage colors used by the French, so i bought those colors and went with it. It looks nice and different

Next up is a light dusting. Then finish the groundwork and the figures. The figures are actually still in black primer. I don't know if all will be done when the campaign ends, but i'm confident the little armoured car is!!
SGTJKJ
#041
Visit this Community
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Saturday, August 05, 2017 - 03:18 AM UTC
Goof, nice job on the camouflage. Sounds like the learning experience.

Looking forward to see more
Namabiiru
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
#399
Visit this Community
Rhode Island, United States
Joined: March 05, 2014
KitMaker: 2,888 posts
Armorama: 1,920 posts
Posted: Monday, August 07, 2017 - 07:11 AM UTC
That is a nice-looking little car! A bit of weathering will really make it stand out.

eMan
#298
Visit this Community
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Thursday, August 10, 2017 - 06:56 AM UTC
Type 3 "Chi-Nu" progress update, lower hull almost done.



69mudbone
Visit this Community
California, United States
Joined: April 26, 2016
KitMaker: 362 posts
Armorama: 285 posts
Posted: Thursday, August 10, 2017 - 11:29 PM UTC
Hi Guys, calling this one finished. Mini -Art Soviet solders at rest.


ClaytonFromEllijay
#454
Visit this Community
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,273 posts
Armorama: 1,138 posts
Posted: Friday, August 11, 2017 - 12:12 AM UTC
Love the folded flag, Ken, nice touch!
eMan
#298
Visit this Community
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Sunday, August 13, 2017 - 04:14 PM UTC
More update pics, ready to paint.



Namabiiru
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
#399
Visit this Community
Rhode Island, United States
Joined: March 05, 2014
KitMaker: 2,888 posts
Armorama: 1,920 posts
Posted: Monday, August 14, 2017 - 04:00 AM UTC
That looks fantastic, Ken! Have you thought about maybe running a red LED up under the fire?

69mudbone
Visit this Community
California, United States
Joined: April 26, 2016
KitMaker: 362 posts
Armorama: 285 posts
Posted: Monday, August 14, 2017 - 08:20 AM UTC
Thanks Mark, maybe sometime in the future.... I'm trying to say above water in these campaigns.
Namabiiru
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
#399
Visit this Community
Rhode Island, United States
Joined: March 05, 2014
KitMaker: 2,888 posts
Armorama: 1,920 posts
Posted: Friday, August 18, 2017 - 03:08 AM UTC
Yeah, I know the feeling. I was doing pretty well so far this year, but I don't see me doing any modeling any time soon with all the work to do on the new house.

Looks as though we're down to just under two weeks left for this campaign. Everyone going to make it?

JSSVIII
Visit this Community
Massachusetts, United States
Joined: March 28, 2007
KitMaker: 1,169 posts
Armorama: 1,067 posts
Posted: Friday, August 18, 2017 - 03:59 AM UTC
Nice build Lap Man, I have that kit in the stash, how is the build? I've been looking for something simple and fun for a break from other projects.
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Friday, August 18, 2017 - 08:31 PM UTC
I see there are less than 12 days till this campaign ends.

I finished some builds recently and while I have a scratchbuild project underway, I was thinking of some OOB project to diversify.

I have the ICM's 1:35 Mercedes-Benz L3000S in my stash(kit# 35420) and I've built my last truck 2 months ago, so I'll join this campaign and give my best to finish in time.

This is my starting picture:


ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Friday, August 18, 2017 - 08:55 PM UTC
One more thing.

Spendid job with the camo,Goof!
I've done such camo on a Bulgarian Vickers E/Mk.B,

so I know how demanding and time-consuming it is.

Yours is realy stunning!!!
eMan
#298
Visit this Community
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Saturday, August 19, 2017 - 12:16 PM UTC
More update pics of my IJA Type 3, started to apply the camo.


goofmuilwijk
Visit this Community
Zuid-Holland, Netherlands
Joined: April 19, 2013
KitMaker: 179 posts
Armorama: 117 posts
Posted: Sunday, August 20, 2017 - 12:39 AM UTC

Quoted Text

One more thing.

Spendid job with the camo,Goof!
I've done such camo on a Bulgarian Vickers E/Mk.B,

so I know how demanding and time-consuming it is.

Yours is realy stunning!!!



Thanks
I was pleased enough with it. Then i sprayed on some satin varnish and it looks like a few of the lines ran out a bit. I mean, they sortof seemed to smudge. But it was decent enough. Weathering is usually hit-or-miss with me. Either it goes well or it messes up. In this case it messed up. And instead of sitting back a bit to decide for the next course of action, i went back at it. It basically went downhill from there. I'll post some picture later this week and probably call it done for this campaign. It'll stay on a shelve for a bit while i decide what to do with it. Respray, mud-up or perhaps a white-wash?
And honestly: i thought a little bit of understated dusting and that would be it. I should learn to stick with the plan

Your Vickers looks great. The separation lines are really thin and good. I'm really jealous
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Sunday, August 20, 2017 - 04:05 PM UTC
Some progress on my "last-minute" participant:



The vehicle I use as a refference:


ClaytonFromEllijay
#454
Visit this Community
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,273 posts
Armorama: 1,138 posts
Posted: Sunday, August 20, 2017 - 06:10 PM UTC
Um....you don't waste any time, do you, Angel?
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Sunday, August 20, 2017 - 07:31 PM UTC
It's a shake-and-bake kit, Clayton.
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Monday, August 21, 2017 - 09:11 PM UTC
Ready for weathering!



Namabiiru
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
#399
Visit this Community
Rhode Island, United States
Joined: March 05, 2014
KitMaker: 2,888 posts
Armorama: 1,920 posts
Posted: Monday, August 21, 2017 - 09:23 PM UTC
Nice!

goofmuilwijk
Visit this Community
Zuid-Holland, Netherlands
Joined: April 19, 2013
KitMaker: 179 posts
Armorama: 117 posts
Posted: Monday, August 21, 2017 - 11:41 PM UTC
Quick build! And nice work on the tarp. Looks cool
goofmuilwijk
Visit this Community
Zuid-Holland, Netherlands
Joined: April 19, 2013
KitMaker: 179 posts
Armorama: 117 posts
Posted: Tuesday, August 22, 2017 - 01:59 AM UTC
That is it for this campaign, i'm calling it done:





In retrospect, i would have used a smaller marker for the seperation lines. I thought it had dried as well, but the varnish made some of the lines on the turret smudge a bit. Not really sure what i would do about that, apart from wait another day or so?
As far as weathering is concerned, i should have stopped when the initial pinwash didn't flow right. Pausing to get some distance, so to speak. Then restart it the next day instead of just keep going.
The front wheels will need to be straightened out sometime in the future. The axle seems warped. Perhaps replace it with a metal rod.

For now it looks alright enough, i think. I'm not really sure how to proceed, but that's for a later date. The figures still needs painting anyways. The base looks cool (i think ) in fifty shades of grey. I'll probably keep it that way for a bit.
I am not really happy with the way my little Wz turned out, but all in all it was a nice kit to build.

Anyways: thanks for an enjoyable campaign. I've seen some really nice builds and some cool kits. It is really great to see so many builds that are off the beaten path
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Tuesday, August 22, 2017 - 01:01 PM UTC
Thanks Mark!

Goof- glad you like my tarp!
I changed the tarp material from napkin to shoe wrapping paper and I' m quite happy with both the result and the availability, that I-thanks to my GF obsession with shoes- have at hand
Your finished model looks cool!
Next time you can avoid the "running" problems with thin black lines by handpainting them with acrylic black paint and fine(5/0 or 10/0) brush.That's what I did on my Vickers E Mk.B

ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Monday, August 28, 2017 - 07:53 PM UTC
I've finished my MB L3000S:





It was fun participating,
69mudbone
Visit this Community
California, United States
Joined: April 26, 2016
KitMaker: 362 posts
Armorama: 285 posts
Posted: Monday, August 28, 2017 - 11:10 PM UTC
Hi Angel, nice looking truck, love the weathering, congrats on finishing.