Campaigns: Completed Campaigns
Campaigns that are completed should be grouped here.
Hosted by Richard S.
Big Cats Mk. V
Tickosity
Visit this Community
Alabama, United States
Joined: July 29, 2017
KitMaker: 10 posts
Armorama: 10 posts
Posted: Saturday, September 02, 2017 - 07:17 PM UTC
I got a start on my kit yesterday, a little slower than I was thinking but it's a start. I'll get more done today, hopefully I'll get the turret to the point that it's waiting for paint.

d111298pw
#456
Visit this Community
Oklahoma, United States
Joined: September 22, 2016
KitMaker: 654 posts
Armorama: 638 posts
Posted: Sunday, September 03, 2017 - 05:07 PM UTC
Time to start this campaign. I'm going to be building the Tamiya Tiger 1 Early version. Will be built OOB. I'll build it as the Tunisian captured Tiger 131, as it is the most accurate based on the kit parts. I will add the missing cross that was on the rear (not identified in the Tamiya instructions). I also plan to use the proper two tone camo scheme (RAL8000 and RAL7008)that the real tank had. Tamiya instructions call out a single color scheme, which is not correct.



Humdingah
Visit this Community
Colorado, United States
Joined: January 08, 2013
KitMaker: 9 posts
Armorama: 9 posts
Posted: Sunday, September 03, 2017 - 11:18 PM UTC

Quoted Text

I got a start on my kit yesterday, a little slower than I was thinking but it's a start. I'll get more done today, hopefully I'll get the turret to the point that it's waiting for paint.



Not to go off-topic too much but what F40 motor is that off to the left of the picture?
Tickosity
Visit this Community
Alabama, United States
Joined: July 29, 2017
KitMaker: 10 posts
Armorama: 10 posts
Posted: Sunday, September 03, 2017 - 11:20 PM UTC
It's from the Fujimi 1:16th scale kit.
Bigrip74
Visit this Community
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
Armorama: 1,604 posts
Posted: Monday, September 04, 2017 - 12:56 AM UTC
WOW! I see a lot of really good kits here. I have a question?
Here is my progress so far. I am going with the metal barrel and would like to know which glue to use that will give good adhesion. SA or Gator Grip.










Tojo72
Visit this Community
North Carolina, United States
Joined: June 06, 2006
KitMaker: 4,691 posts
Armorama: 3,509 posts
Posted: Monday, September 04, 2017 - 01:21 AM UTC
Homemade zimm looks good Robert,I would use CA glue for the metal barrel,I use the Gator Grip for more delicate PE
Bigrip74
Visit this Community
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
Armorama: 1,604 posts
Posted: Monday, September 04, 2017 - 01:55 AM UTC
Anthony, thanks for the comment and glue help. I just primed the hull and am not happy with the zimm. May need to sand a little.
Tickosity
Visit this Community
Alabama, United States
Joined: July 29, 2017
KitMaker: 10 posts
Armorama: 10 posts
Posted: Monday, September 04, 2017 - 04:45 AM UTC
It looks good from what I can see. I'm not brave enough to put the zimm on my kit and I don't want to buy the pe sets. I might change my mind though. I'll think on it while I'm building the interior. I still am considering a metal barrel for it, I'm not too happy with the kit barrel.
Tojo72
Visit this Community
North Carolina, United States
Joined: June 06, 2006
KitMaker: 4,691 posts
Armorama: 3,509 posts
Posted: Monday, September 04, 2017 - 05:06 AM UTC
I attached the upper hull and began to attach the smaller items,so far,so good.





Thirian24
Visit this Community
Oklahoma, United States
Joined: September 30, 2015
KitMaker: 2,493 posts
Armorama: 2,344 posts
Posted: Monday, September 04, 2017 - 06:09 AM UTC
Bob, nice Zim.

Anthony, killer looking as always. I always enjoy your builds.
ColinEdm
Staff MemberAssociate Editor
ARMORAMA
Visit this Community
Alberta, Canada
Joined: October 15, 2013
KitMaker: 1,355 posts
Armorama: 1,229 posts
Posted: Monday, September 04, 2017 - 07:58 AM UTC
Just signed up for this one, I'll be building Academy's Tiger II Last production:

and I will be aiming for this:

which I am also doing for the 'Battle Damage' campaign (goin' for a twofer).
Thirian24
Visit this Community
Oklahoma, United States
Joined: September 30, 2015
KitMaker: 2,493 posts
Armorama: 2,344 posts
Posted: Monday, September 04, 2017 - 09:24 AM UTC
Very cool, Colin. Looking forward to watching that.
Whiskey_1
Visit this Community
Zuid-Holland, Netherlands
Joined: November 22, 2008
KitMaker: 279 posts
Armorama: 272 posts
Posted: Monday, September 04, 2017 - 09:08 PM UTC
Bit more progress on this end. Most of the large sections are still loose while I wait for some upgrades to arrive.





Tickosity
Visit this Community
Alabama, United States
Joined: July 29, 2017
KitMaker: 10 posts
Armorama: 10 posts
Posted: Tuesday, September 05, 2017 - 05:04 AM UTC
Turret ready for paint for the most part. Interior tub mostly ready for paint. Next onto the transmission and engine, probably start tonight.





d111298pw
#456
Visit this Community
Oklahoma, United States
Joined: September 22, 2016
KitMaker: 654 posts
Armorama: 638 posts
Posted: Tuesday, September 05, 2017 - 07:32 PM UTC
Getting the main parts assembled before priming. Hull is together.





And of course a wheel, or two, to clean-up.

Thirian24
Visit this Community
Oklahoma, United States
Joined: September 30, 2015
KitMaker: 2,493 posts
Armorama: 2,344 posts
Posted: Wednesday, September 06, 2017 - 04:34 AM UTC
Coming along nicely fellas!!
Chaman911
Visit this Community
United States
Joined: August 28, 2015
KitMaker: 319 posts
Armorama: 308 posts
Posted: Wednesday, September 06, 2017 - 06:34 PM UTC
A little progress on the KT. The bottom picture is the paint scheme I have finally decided on.




Tojo72
Visit this Community
North Carolina, United States
Joined: June 06, 2006
KitMaker: 4,691 posts
Armorama: 3,509 posts
Posted: Sunday, September 10, 2017 - 05:08 AM UTC
This one has primer and is ready for paint,note the extra armor on the turret







Chaman911
Visit this Community
United States
Joined: August 28, 2015
KitMaker: 319 posts
Armorama: 308 posts
Posted: Sunday, September 10, 2017 - 05:46 AM UTC
Looks great Tojo!
Blade48mrd
Visit this Community
Washington, United States
Joined: September 03, 2004
KitMaker: 1,185 posts
Armorama: 810 posts
Posted: Tuesday, September 12, 2017 - 09:24 AM UTC
Finally managed to get a start on my Dragon #6232 'King Tiger-Late Production' and working on the lower hull. I'm using the 'Magic Tracks' from Dragon #6254 'King Tiger-Battle of Bulge' and 9 tooth sprocket. Also decided to go with an 'Orange Hobby' 88mm KwK 43 L71 barrel instead of the kit aluminum one for the nicer looking muzzle brake. If anyone is interested in the Kit's 'single link' late tracks and 18 tooth sprocket and/or the Fallschirmjager figures, I'd be happy to donate them. Just send me a PM.


Mike
dtniedert
Visit this Community
Kentucky, United States
Joined: December 11, 2014
KitMaker: 152 posts
Armorama: 139 posts
Posted: Tuesday, September 12, 2017 - 07:00 PM UTC
In with Leopard 2A4M Can.
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Wednesday, September 13, 2017 - 11:08 AM UTC
Hey Dustin,
Got room for me and my big cat? I started a month or so ago, and have been slowly working forward with early assembly and pre-painting.

There are still a million parts left, it seems. Every time I need a piece it takes forever to sort through the pile of sprues. So, despite my progress it feels like I have done less than 25% of the complete build. So, I'm enlisting unless you think it's more than 25%.

My Big Cat is Dragon's Tunisian Tiger 131 in 1/35 scale. I may choose a different Tiger from the Spz.Abt 504 depending on how I feel later. Here's the pic:


Cheers,

Gaz
Bluestab
Visit this Community
South Carolina, United States
Joined: December 03, 2009
KitMaker: 2,160 posts
Armorama: 1,906 posts
Posted: Wednesday, September 13, 2017 - 09:19 PM UTC
It looks like some nice kits being built for the kitty show.

I'm off to a slow start because of a problem. I began my build and have discovered that my Leopard 1a5 kit is actually a Leopard 1a4. Not a huge deal, but I'm having to rethink the build a bit. I should have caught it before but I didn't.

I'll probably still go with some of the same elements I was planning to add to the what-if vehicle. I probably won't go with the 120mm gun though.

I hope to really get started this weekend.
Thirian24
Visit this Community
Oklahoma, United States
Joined: September 30, 2015
KitMaker: 2,493 posts
Armorama: 2,344 posts
Posted: Thursday, September 14, 2017 - 11:03 PM UTC
Fantastic work everybody! Please keep it up!

I love these Big Cat campaigns and will probably continue them on in the future, because everybody always pumps out some very nice work.

Anthony, that Panther is looking great and you made short work of it.

Gaz, yes sir please do join! Can't wait to see what you do with that Big Cat!

Thank you to everybody for making this campaign awesome.

Hopefully I'll find some time for a Cat of my own. Lol
ColinEdm
Staff MemberAssociate Editor
ARMORAMA
Visit this Community
Alberta, Canada
Joined: October 15, 2013
KitMaker: 1,355 posts
Armorama: 1,229 posts
Posted: Saturday, September 16, 2017 - 10:58 PM UTC
Looking good everyone!
Some progress on my Kassel Tiger:
lower hull, running gear and road wheels (3 pieces each):


Turret is modtly done, have to add proper weld beads everywhere as the kit ones are very sunken. Turret shot damage added and painted interior black as it is burnt out (won't really see anything anyway).