135
Panzer IV D

Dragon Panzer IV Ausf.D
introduction

construction begins
stage 1
Stage one of the instructions begins with the assembly of the drive sprockets and idlers. The drive sprockets themselves are made up of 7 parts each, that is, if you take the easy option! Dragon offers you the option of actually using a pre-drilled sprocket face, with separately moulded bolts! An extremely useful option for maintenance dioramas, where the sprocket can be shown partially dis-assembled. Since I wanted to display the finished vehicle fully assembled, and retain what little sanity I have, I decided to use the sprocket with the moulded on bolt detail! There is any tiny amount of play when joining the two halves of the sprocket, so be careful that the teeth of the two halves are perfectly aligned or it could cause problems later when it’s time to install the tracks!

With the construction of the idlers, we are again offered a choice, this time, whether or not to use the photo-etched ‘faces’ which sandwich the styrene halves of the idler. I chose to use them, and again, you must be careful when cementing them into position, since both plates are different, one having a flat edge on the central locating hole.

The next job was to build each of the 8 leaf-suspension bogeys. Each of these is made of 18 parts, and so it’s no small job. Apparently they are built in a similar way to the originals, in order that they function the same. I found that the trick to constructing them is to build them up to the point of putting part A10 into place and then to embed the rest into a blob of blutack before placing A10 into place, and then carefully adding a tiny amount of liquid styrene cement around it’s border. You must be careful not to overdo it, so that the leaf suspension remains free to move. In this way they do indeed function in much the same way as the originals! The road wheels can be assembled at this point, and the road wheel tyres can either be left on or off for ease of painting later on. Be warned though, that the fit is tight, and indeed they can split when putting them onto the road wheels, so if you are going to paint them separately, make sure there is no paint on the inside or even this small thickness can lead to them splitting later! The wheel hubs fitted to the D were of the early type, which are represented by parts A31, although many photographs show a mixture of the later armoured type, which are included in the kit too, so you can correctly use a mixture of the two types, which is what I did.

Stage 1 ends with the construction of the lower hull rear plate, no major problems to look out for here, just make sure you insert parts D28 into the idler housings before fitting them, something I had to go back and do later! Dragon provide small etched chains for both the filler cap and the towing pin, but these look a bit ‘flat’, and so I replaced both with some real chain from the spares box.

  • 002
  • 003
  • 004
  • 005
  • 006
  • 007
  • 008
  • 009
  • 010

About the Author

About Vinnie Branigan (Teacher)
FROM: ENGLAND - NORTH WEST, UNITED KINGDOM


Comments

Excellent Vinnie. This will be handy when building the kit. The finish and weathering look great. Another nice model for your collection. What chain did you use, (Links per inch) and where did you get it? I agree that etched chain does not look the part .. I´d rather go with some slightly out of scale chain instead!
APR 29, 2006 - 05:08 AM
Amazing work as allways Vinnie Thanks for the tips and hints , it will be great help as im building a DML Panzer IV as we speak Ian
APR 29, 2006 - 05:09 PM
Thanks for the Review. Looks great & you make it seem so easy. So, Like I could do it in a weekend right? :-) :-) :-)
APR 29, 2006 - 06:48 PM
Brilliant Vinnie, another first class build,the weathering is top notch. I think the D.A.K tanks with the yellow over grey are one of the most difficult to get right,and you got it spot on Is this going in a dio? with a zundapp :-) :-) ??? Must do one of these IV's soon, what one?,B,C,D, Vorpanzer...aaahhhh can't choose :-) :-) but when I do I will follow your review Cheers mate Andy
APR 30, 2006 - 12:07 AM
LOved the article Vinnie!! Especially since I am in the throes of building the Tristar version. So many parts, so many opportunities to goof. Glad to see I'm not the only one having a few difficulties. What I found amazing is that areas I have struggled with are the same ones you had problems with even though they are different brands....hhmmmm. My biggest complaint on the Tristar is that in several areas it is not clear how parts are suppossed to go togehr and that has caused me the most problems. LIke that chain, I use the stuff for anchor chain on my 350 scale ships, I'll have to see if what I have can be used to substitute or go fid some finer chain soeplace
APR 30, 2006 - 12:49 AM
Vinnie i can say only one thing, "damn good job " sir. And also a perfect review. 043
APR 30, 2006 - 12:57 AM
Steve, I get some strange looks when going in cheap girly accessory shops looking for earings with very fine chain,and tell the nosey assistants "They not for me,they for my model tank!!" :-) :-) :-)
APR 30, 2006 - 01:35 AM
[quote]Here''s a full build of the DML Panzer IV Ausf.D, finished in tropical scheme! Vinnie Please forgive my lack of knowledge.... But which modification , would be needed , in order to represent the " Up - gunned " Panzer IV Ausf.D , as shown at the Bovington museum ? Cheers... Mike
APR 30, 2006 - 09:05 PM
Hi Vinnie, great job as usual If I can say something... I don't like the desert yellow tone. In my opinion it should be pale and lighter cause the sun, and the wear and tear of dust and sand.... But it's only my personal opinion!!! ciao tom
MAY 04, 2006 - 01:02 PM
Vinnie Another superb project. Got some really good tips from the article as well. I don't know where you get the time to do the project AND the article!!
MAY 12, 2006 - 12:46 AM