_GOTOBOTTOM
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
Waiting for a new Deuce and a Half
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 04:11 AM UTC
On the heels of the topic "Waiting for a new Famo" are the following remarks about the logic of Tamiya producing new variants of their great GMC Duece and a Half model.

I am always amazed at Tamiya in that after a model has matured (the tooling is paid for and sales are dropping off due to market saturation) they don't seem to even think to come out with other possible variants to "re-interest" the market in their kits.

A good example I think is the GMC Deuce and a Half. Tamiya produces a GREAT kit of the soft top cab version but now as sales slow down it would be a natural to come out with as an example; the enclosed cab version.

But the list of possible variants would be quite long; a fuel truck (2 styles plus a trailer), a dump truck, an extra long wheelbase version, a short wheelbase version, cab over engine, fire truck, crane, 1 1/4 ton two-axle version, 2-axle semi-tractor (with a large group of associated trailers), etc.

The list for the Deuce is almost endless and doing variants would mean minimual front end investment in retooling, yelding a maximum return on investment.

the Chassis Man
Spuds
Visit this Community
Georgia, United States
Joined: August 31, 2002
KitMaker: 393 posts
Armorama: 287 posts
Posted: Wednesday, February 06, 2013 - 04:20 AM UTC
Amen, Michael. Although there are a number of aftermarket conversions available now, most are fairly expensive and don't always fit well without some extra work. It would be nice to see some new stuff.
jon_a_its
Visit this Community
England - East Midlands, United Kingdom
Joined: April 29, 2004
KitMaker: 1,336 posts
Armorama: 1,137 posts
Posted: Wednesday, February 06, 2013 - 04:23 AM UTC
IF Tamiya produce them...

I will buy them...
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 05:07 AM UTC
I have been working on (Kit Bashing & Scratch Building) an extensive US Motor Pool for some time now. But I get tired of choping frames and stealing closed cabs from old Italeri trucks (though they do stand up well when paired with the new high quality Tamiya chassis and load box.

So far I have:
- Open cab water truck
- Closed cab standard CCKW with gun ring
- Closed Cab Army Air Corps Flightline fuel truck with 2-axle trailer
- Cab Over Engine CCKW (Soft Top)
- 1 1/4 ton 2-axle Closed Cab Chevy
- 1 1/4 ton 2-axle Open Cab Chevy Semi-tractor (With 4 ton scratch built trailer)
- CCKW conversion to light British RR locomotive

Working on:
- CCKW Closed Cab fire truck
- 1 1/4 ton Chevy Closed Cab fire truck
- Single axle 1200 gal. fuel semi-trailer


the Chassis Man
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 05:20 AM UTC

The chassis, driveline and load box are all shortened versions of the Tamiya Deuce, the enclosed cab is from the Italeri water truck, finally the Ben Hur trailer is scratch built.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 05:28 AM UTC
Papa Tamiya you could be selling me all these kits but for some reason that is just not the way you see your relationship with your customers.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 05:41 AM UTC

The trailer landing gear will actually work and can be repositioned.
The tractor chassis is from Italeri. I used it because it is a more correct true C-channel frame. The open cab is all Tamiya. The four ton freight trailer is scratch built except for wheels, springs and the rear beam plus tail lights which are all from Italeri.
Kenaicop
#384
Visit this Community
Nevada, United States
Joined: August 23, 2005
KitMaker: 1,426 posts
Armorama: 1,316 posts
Posted: Wednesday, February 06, 2013 - 05:44 AM UTC


Cargo load is a block of Lego's covered in white glue soaked tissue paper
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 05:49 AM UTC
James - Thanks for the idea about using the logo blocks. I'll be copying that idea very shortly!

Also those tire chains look fantastic! A+++

Yep! Gonna have to get some tire chains and get my trucks out in the snow!
Kenaicop
#384
Visit this Community
Nevada, United States
Joined: August 23, 2005
KitMaker: 1,426 posts
Armorama: 1,316 posts
Posted: Wednesday, February 06, 2013 - 05:52 AM UTC
Thanks! The "male" side is facing down with a plate of sheet styrene covering the top. There is also a small bit of junk from the parts bin on top just to give it some idea that there is something other than boxes under the tarp. The covered gun is from a french company, can't remember the name, same with the wheels, can't remember at all what company it is, sorry. The partial tarp in front is lead foil sewn in like the real one, the rest is all Tamiya
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Wednesday, February 06, 2013 - 06:02 AM UTC

Italeri water truck with Tamiya's newly tooled (8 years ago) open cab.

Cannot believe that Tamiya would not make at least one of the fuel trucks! It's just a simple change out from dry load box to fuel tank and the resin fuel truck conversion (the one with the twin tanks)that's out there is hardly worth having.

PLEASE NOTE: the resin fuel truck that has the single large fuel tank and the spare tire mounted on the rear is Aces! A real jewel! Highly recommented!
Kenaicop
#384
Visit this Community
Nevada, United States
Joined: August 23, 2005
KitMaker: 1,426 posts
Armorama: 1,316 posts
Posted: Wednesday, February 06, 2013 - 06:21 AM UTC

Quoted Text


Italeri water truck with Tamiya's newly tooled (8 years ago) open cab.

Cannot believe that Tamiya would not make at least one of the fuel trucks! It's just a simple change out from dry load box to fuel tank and the resin fuel truck conversion (the one with the twin tanks)that's out there is hardly worth having.

PLEASE NOTE: the resin fuel truck that has the single large fuel tank and the spare tire mounted on the rear is Aces! A real jewel! Highly recommented!



Very nice, I too have the Italeri fuel truck all built and ready for paint. I lined both sides with Jerry cans in racks. I don't think there were any two parts to that kit that fit without a struggle
jimbrae
Visit this Community
Provincia de Lugo, Spain / España
Joined: April 23, 2003
KitMaker: 12,927 posts
Armorama: 9,486 posts
Posted: Wednesday, February 06, 2013 - 09:48 PM UTC
Some excellent points (and some brilliant looking models) in this thread.

Some additional points. I never did figure why Tamiya only did the soft-top open cab.

Although I still maintain that considering the numbers which were produced, U.S. softskins have never been a major priority amongst the manufacturers.

Fortunately though, that's all going to change soon. Hobby Boss (as you're doubtless aware) are doing the U.S. M19 Tank Transporter (with 40 Ton Rogers Trailer and the U.S.White 666 Cargo Hard-Top. Mirror Models have got a Diamond T planned as well, so it's looking pretty reasonable...
jon_a_its
Visit this Community
England - East Midlands, United Kingdom
Joined: April 29, 2004
KitMaker: 1,336 posts
Armorama: 1,137 posts
Posted: Thursday, February 07, 2013 - 01:40 AM UTC
Very nice work Michael,
& with all these new 'B' echelon MV's US & Allied, in plastic we 'might' get spoiled for choice
gremlinz
Visit this Community
Hamilton, New Zealand
Joined: February 07, 2009
KitMaker: 795 posts
Armorama: 743 posts
Posted: Thursday, February 07, 2013 - 11:25 PM UTC
I'm surprised Hobbyboss hasn't done anything different with their GMC.
retiredyank
Visit this Community
Arkansas, United States
Joined: June 29, 2009
KitMaker: 11,610 posts
Armorama: 7,843 posts
Posted: Thursday, February 07, 2013 - 11:30 PM UTC
You will have to wait for the conversions to be out, for some time. After all, it took several years for a T-90 to appear in plastic. As soon as it did, everybody with the conversions went to light speed on getting theirs' built. Also, when it comes to Allied vehicles, the demand is rather low. Unless, of course, you are waiting for a new variant of the Sherman.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Saturday, February 09, 2013 - 03:57 PM UTC
Did not know about the coming White with the Rogers Trailer but that sounds like a must have for me.

I was very happy when the Studebaker model hit the market.

I have always thought it's kind of funny but Studebaker actually designed the open cab for the Army Deuce but since all their trucks were going to the Russians the Soviets didn't like them so most all the studebakers remained closed cabs. However the Army imposed the Studebaker design for the open cab onto GMC making them use the design.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Saturday, February 09, 2013 - 04:21 PM UTC

This is the new Tamiya chassis with the Tamiya load box . The cab comes from Italeri and the trailer is scratch built.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Saturday, February 09, 2013 - 04:25 PM UTC


Beautiful CCWK Browser Conversion as done by Chris Toopes seen at the 2010 Cincinnati Hobby Competition.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Saturday, February 09, 2013 - 04:56 PM UTC

My attempt to scratch build the conversion for Air Corps Fuel Browser.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Sunday, February 10, 2013 - 02:27 AM UTC
I also did not know HobbyBoss was offering a GMC, how am I missing all these offerings?

I make good use of the Italeri and Heller offerings as well as that from Tamiya but the US Motor Pool freaks in this country need some more plastic for their favorite subject!
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Sunday, February 10, 2013 - 02:48 AM UTC
How about this oddity, a WWII CCKW mounted back hoe? Saw this one at the 2009 MVPA in Evansville, IN. (be sure to check out the LST Museum!)

Mike Koenig Photo: 165th Signal Photo Company

Mike Koenig Photo: 165th Signal Photo Company

Still completely functional. Do you love that half cab? The spare tire is mounted on the other side where the cab door would be. The cab itself is still all there but there is only one seat and the rest of the space is for misc. tool storage.

Now isn't this the perfect one of a kind, odd-ball that a model company like Tamiya would just HAVE to make a model of?
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Sunday, February 10, 2013 - 02:56 AM UTC
Or my personal favorite the Chevy 1 1/4 ton 2-axle (I call them a Baby Deuce) utilized as a military fire truck.

Mike Koenig Photo: 165th Signal Photo Company

Papa Tamiya - we need one.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Sunday, February 10, 2013 - 03:03 AM UTC
One of my home made "builders photos" of a classic short wheelbase deuce seen at the MVPA show in Evansville in 2009.

Mike Koenig Photo: 165th Signal Photo Company

Again the short wheelbase vehicles are, I think, more attractive but why no model of this one?????
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Sunday, February 10, 2013 - 03:18 AM UTC
Here is another great short wheelbase CCKW this time with a hard cab! Owned by 4th Armored out of Shepherdsville, KY and seen at the Secret City event in Oak Ridge, TN in 2009

Mike Koenig Photo: 165th Signal Photo Company
 _GOTOTOP