_GOTOBOTTOM
Armor/AFV: Vietnam
All things Vietnam
Hosted by Darren Baker
V-100/M706 turret ring diameter?
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Thursday, July 14, 2016 - 05:09 PM UTC
Looking for confirmation that the M706 had a 36" diameter turret ring when fitted with the M706, perhaps in Hunnicutt's Armored Cars?

Help, anyone?

Thanks.

Frenchy
Visit this Community
Rhone, France
Joined: December 02, 2002
KitMaker: 12,719 posts
Armorama: 12,507 posts
Posted: Friday, July 15, 2016 - 12:31 AM UTC
I haven't found any confirmation in the Hunnicutt book, but the diameter of the Cadillac-Gage T50 turret (same as the V100/M706 one) ring as fitted to Australian M113A1's is 863.6mm (or 34" )

http://www.mheaust.com.au/Aust/Research/M113T50/M113T50.htm

H.P.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 15, 2016 - 01:17 AM UTC
Thanks, Frenchy.

That's interesting - I found a Cadillac Gage document referring to a '34" turret', so maybe that's the internal ring diameter?

Here (http://antipodeanarmour.blogspot.com.au/p/new-zealand-m113-fov-modelling-notes.html?m=1), which mentions a hole being cut in the M113 roof of 937mm. Wouldn't a 863.3mm turret fall through that?
Frenchy
Visit this Community
Rhone, France
Joined: December 02, 2002
KitMaker: 12,719 posts
Armorama: 12,507 posts
Posted: Friday, July 15, 2016 - 02:06 AM UTC
For good measure, I've taken a look at Michael K.Cecil's Australian Military Equipment Profiles Vol 4 : M113 & M113A1 from 1962 to 1972, and he mentions the 34 inch diameter turret ring....

H.P.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 15, 2016 - 02:15 AM UTC
Thanks - does he mention anything more about the hull modifications to accomodate the T50 turret?
Frenchy
Visit this Community
Rhone, France
Joined: December 02, 2002
KitMaker: 12,719 posts
Armorama: 12,507 posts
Posted: Friday, July 15, 2016 - 11:49 AM UTC
Here are a few related lines from the book :

"Fitting of the turret [../...] involved cutting a hole in the hull roof to accommodate the 863.6mm (34 inch) diameter turret ring[.../...]The Workshop team had worked on the assumption that the turret hole should be concentric with the original commanders cupola, but when the turret was first fitted, it was found to strike the front engine hatch hinge lugs[.../...]Eventually, the hole was re-cut with its center 12.7mm (0.5 inch) to the rear of the original commanders cupola."

H.P.
Frenchy
Visit this Community
Rhone, France
Joined: December 02, 2002
KitMaker: 12,719 posts
Armorama: 12,507 posts
Posted: Friday, July 15, 2016 - 01:11 PM UTC
OOOPS ! It looks like I may have been a bit too hasty in my conclusion. Here's another excerpt from the same book :



So it appears that the 34 inch diameter cutout was done on the first T50 trial vehicle, but it was widened on the following APC's...

H.P.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 15, 2016 - 03:01 PM UTC
That is confusing. Thanks though.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 15, 2016 - 05:00 PM UTC

Tried a 1/16 scratch build of the Cadillac Gage '34" turret' today, using the information from a visit to the Australian War Memorial Annex and from Frenchy:





With the correctly scaled spacer.

afvaficionado
Visit this Community
New Zealand
Joined: February 16, 2010
KitMaker: 160 posts
Armorama: 159 posts
Posted: Sunday, July 17, 2016 - 03:20 AM UTC
Hi Gary
Very nice work. As you've probably become aware the T50 turret doesn't actually make contact with the M113 when installed on that vehicle. There is a riser/collar that sits between the turret & M113 hull.
I think the reason for that is to ensure the guns of the turret clear the various hull top fixtures - drivers hatch, aerial guards, filter box -on Aust & NZ versions.
As a consequence, the T50 turret fitted to the M113 is different from that fitted to the V100, in that it features a skirt around the base, to protect the join between the turret base & riser collar:- V100 - http://data3.primeportal.net/apc/brent_sauer/v-100_commando/images/v-100_commando_17_of_20.jpg -
M113 - http://asnz.nz/forums/topic/14837-work-on-the-m113/ -
Mal
afvaficionado
Visit this Community
New Zealand
Joined: February 16, 2010
KitMaker: 160 posts
Armorama: 159 posts
Posted: Sunday, July 17, 2016 - 03:45 AM UTC
The riser/collar is also called a plinth - http://www.network54.com/Forum/110741/thread/1206485122/Kiwi+M113+EAAK+WIP -

Mal
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Sunday, July 17, 2016 - 04:58 AM UTC
Thanks, Mal.

Ack on the spacer ring. Here's a pic of the mocked-up ring as it stands:



And here it is with the tweaked turret:



Seems to be working, so far, though there's some serious refining to do.
afvaficionado
Visit this Community
New Zealand
Joined: February 16, 2010
KitMaker: 160 posts
Armorama: 159 posts
Posted: Sunday, July 17, 2016 - 06:53 AM UTC
Hi Gary
Nice. Are you making the guns capable of elevating? Is that the Chris Ludwig 1/16th M113 kit?
I've got a couple of Ultimate Soldier 1/18th scale M113's that I'm slowly converting to NZ M113's with T50 turrets, but I've pretty much put them aside to do a Scorpion.
M113's - http://hobbyhavoc.com/forum/index.php?topic=4046.0 -
Scorpion - http://hobbyhavoc.com/forum/index.php?topic=4559.0 -
You have to sign in to see the pics.

Mal
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Sunday, July 17, 2016 - 08:39 AM UTC
Mal,

I think it's Chris' kit. Have some roadwheels coming from Shapeways. Diehl 513 tracks are the next challenge.

The guns won't elevate - I also plan on having the entire vehicle closed up.

There's some discussion of whether the turret will be copied in resin for others, should they be interested.

Just registered for the hobby havoc site - looking forward to seeing the 1/18 pics.

Regards,

Greg
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Monday, July 18, 2016 - 06:14 PM UTC
Some more progress - improved the proportions of the front of the turret, roughed out the mantlet, & obtained the Aber 1/16 .30 & .50 cal barrels.


RLlockie
Visit this Community
United Kingdom
Joined: September 06, 2013
KitMaker: 1,112 posts
Armorama: 938 posts
Posted: Monday, July 18, 2016 - 10:23 PM UTC
I suspect that they all had the same 34" turret ring and that required a 36.87" hole cut in the roof to accommodate the ball race. The ring diameter in other words is not the same as the size of the hole in the roof plate.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 22, 2016 - 04:01 AM UTC
Well, the first attempt at building a mantlet from flat parts & bending them to shape was a bit of a fail.



The second, from .50 cal (1/2" or 12.7mm) tubing worked a little better. Considering it'll be under a weather boot, it'll work. Those Aber barrels look lovely!



Friction mounted in the turret itself.



And with the start of the commander's hatch.



Not terrible.
youngtiger1
Visit this Community
California, United States
Joined: May 14, 2008
KitMaker: 534 posts
Armorama: 344 posts
Posted: Friday, July 22, 2016 - 09:25 AM UTC
Nice work on the turret Greg. I want to build one of the Philipines Marines M706 with the twin machine gun turret. To me, it looks similar to the aavp7a1 kit. Of cource, with bit modification it can work.

2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 22, 2016 - 12:45 PM UTC
Mike,

Thanks for your comments.

Google 'Cadillac gage 1 meter turret' - there's lots of line drawings out there. I scratch built one for my pre-trumpeter M1117 scratch build. Easy build.

Greg
youngtiger1
Visit this Community
California, United States
Joined: May 14, 2008
KitMaker: 534 posts
Armorama: 344 posts
Posted: Friday, July 22, 2016 - 02:34 PM UTC
Greg, thanks for the tip. I'll check it out soon. Btw, do you pics of your pre-trump M1117? I have the trump M1117 kit as well and I was bit disappointed that it doesn't come with interior. So do the rest of the Commandos. I don't understand why manafuctures only do half way jobs? Anyway, keep up the good work
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Friday, July 22, 2016 - 03:21 PM UTC
Thanks Mike. I'd have to dig it out of storage. Got as far as the base coat, but never tackled the suspension or tyres. I did compare it to the Trumpeter kit. Came close, dimension-wise.
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Saturday, July 23, 2016 - 05:33 PM UTC
So, picked up the HobbyBoss M706 to plagiarise the turret hatch. Was impressed/surprised by the size difference (& how closely it scales with my efforts, TBH)



Decided to rework the splash ring that surrounds the commander's hatch, moving from .020 x .020 (0.5mm) to .030 x .030 (0.75mm). Also, instead of using multiple pieces, I'll fashion it from one bit, bending it around some pins drilled into the turret roof:



I've also started to open up the viewing episcopes, & adding weld beads.
afvaficionado
Visit this Community
New Zealand
Joined: February 16, 2010
KitMaker: 160 posts
Armorama: 159 posts
Posted: Sunday, July 24, 2016 - 03:17 AM UTC
Hi Greg
Looks good

Mal
2805662
Visit this Community
Australian Capital Territory, Australia
Joined: March 27, 2008
KitMaker: 546 posts
Armorama: 541 posts
Posted: Tuesday, July 26, 2016 - 12:38 PM UTC
Thanks Mal

Real life has been brutal this week, seriously hampering progress on the T50.

Take three on the commander's hatch seems to be working well, thanks in part to HobbyBoss providing a three dimensional reference. Also, have started hacking up a CD case for the episcopes. Will paint the inside of the turret sea foam green so that the correct shade is visible through the epis themselves.



And a side view...only another four facets to go until the rough shape of the hatch is complete.



(Oh, the gap at the bottom of the spacer is intentional.)

All comments welcome, as always.
youngtiger1
Visit this Community
California, United States
Joined: May 14, 2008
KitMaker: 534 posts
Armorama: 344 posts
Posted: Tuesday, July 26, 2016 - 01:24 PM UTC
Coming along nice Greg. I bet that CD case cutting/hacking was a mess. Those clear cases are very britial and crack easy. I tried using rpthem in the past but kept cracking on me when I was cutting. So, I gave up and found some clear stryne at the hobby shop. So, is this thing going to be completely scratch build?
 _GOTOTOP