ICM HOLDING [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
US Infantry 1918
US Infantry 1918
  • move

by: Darren Baker [ CMOT ]

Introduction

ICM continues to be the company to look to where World War One figures are concerned. This time around it is the second release of US Infantry, but unlike the first offering these are depicted as in the fray. This is a four figure set offering, and with ICM now being one of the very best figure producers in injection moulded plastic in 1/35th scale let’s see what they have presented us with here.

Contents

This offering from ICM is supplied packaged in their usual cardboard flip top box with a separate card cover with the artwork printed on it. I believe ICM supplies the best protected injection moulded kits available today. Inside of this packaging you will find two tan sprues packed in a single re-sealable plastic bag and two instruction sheets.

Review

Starting with an examination of the sprues leaves me a happy modeller; the figures are free of flash and have very little in the way of moulding seams present. The sprue of weapons and equipment is also very good, but there are some slight moulding seams to deal with and of course the muzzle of the weapons will need to be drilled slightly to improve their appearance. The four figures offered are an officer of a rank I have been unable to see, a three striper who I believe in this period would be a sergeant (I was unable to see all three stripes on the figure, but they are present on the instructions) and no rank visible on the remaining two figures. By this period of the war the soft felt hats are gone and good old steel helmets are the order of play.

The officer of the group is identified by the leather puttees over BROWN shoes; brown leather shoes rather than black appears to be the order for all American troops during their participation in World War One. The uniform would appear to be accurate in all respects; I especially like the button and pocket detail that has been replicated. The webbing is also very good for the most part, but where the gas mask holdall strap comes from the shoulders down to the holdall you have a solid plastic triangle due to the limitations of the moulding process and where ICM has made the break in the strap. My advice is to remove this moulded detail and scratch some straps from tape or your preferred material. This issue unfortunately is present on every one of the four figures. The gas mask bags suppled on the figure sprue are poor when compared to part W30 on the weapons and equipment sprue as the ribs of the filter is clearly visible through the material as seen in period photographs.

The sergeant has again got the excellent uniform detail. The wrap around puttees are well detailed so that after painting and weathering the detail should pop. The backpacks that the enlisted figures wear are very good on the back and top, but the side details are lacking in some respects. This being the heavy pack used in long marches seems an odd choice for what is in my opinion troops in action. These large packs have also thrown out the locations of the extra equipment such as canteens, due to this I would modify the poorly detailed gas mask packs and use them as the small pack for which they are ideally suited and this will allow the better placement of the other equipment.

The helmets that are provided for the four figures are attached to the sprue via the rim of the helmet and this means great care is going to be needed when removing them from the sprue to avoid damage to the shape. The hand and facial detail is excellent for injection moulded plastic figures. The hands have very good finger detail that should please even the most demanding of modellers with the possible exception of the hand moulded holding the M1911. The faces could be improved via the use of resin, but I do not feel that the improvement will be worth the cost in this case.

The stance of the officer is of a person making a cautious advance with a 1911 drawn, but not held in a typical firing stance. The sergeant is moving forward and sighting down his rifle at an unseen enemy. The remaining two figures consist of a figure charging forward as if going to bayonet someone and the other looks to be jumping up, over or down.

Equipment and Weapons Sprue

The following is a breakdown of the sprues contents with corrections where possible.
Lewis machine gun
Chauchat CSRG Mle 1915 machine gun
Browning M1918 BAR machine gun
M1918 BAR pouches (left)
M1918 BAR pouches (right)
Springfield M1903 rifle
Springfield M1903 rifle with bayonet
M1905 bayonet
M1905 bayonet with scabbard
M1905 bayonet scabbard
Springfield M1903 rifle with rifle mortar
Rifle mortar grenade
Winchester M1897 trench gun with bayonet
M1897 bayonet scabbard
Trench knife
Springfield pouches (3 sections)
Springfield pouches (2 sections)
Small pouch
Colt army M1917 revolver
Smith and Wesson army M1917 revolver
M1917 revolver in holster (left)
M1917 revolver in holster (right)
Revolver ammunition pouches
Colt 1911 pistol
Colt 1911 pistol in holster
Colt 1911 holster
M1 grenade
Shovel
Shovel in case
Pickaxe
Pickaxe in case
Axe
Axe in case
Trench periscope (wood)
Trench periscope in case
Canteen
Respirator in bag
Officer bag
Binoculars
Binocular case
M1917 steel helmet
Compass cover

Conclusion

This offering from ICM is another excellent addition to their range of World War One figures in 1/35th scale. The hand and facial detail is some of the best I have ever seen in injection moulded plastic. The detail present on the figures uniforms all appears to be accurate and well replicated. The strap detail for the gas masks will need some attention to make this offering top notch.
SUMMARY
Highs: Great figures of an under represented genre and a large selection of weapons and equipment finishes it off a treat.
Lows: The strap detail for the gas mask bag is disappointing where it connects to the bag.
Verdict: A great figure set that is not bettered for the subject matter at this time in injection moulded plastic.
  Scale: 1:35
  Mfg. ID: 35693
  PUBLISHED: Mar 11, 2017
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 84.86%

Our Thanks to ICM Holding!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

Thanks for the comprehensive review, looks like another must have set of figures to add to the stash. Al
MAR 10, 2017 - 09:52 PM
It would be nice to know how well the parts fit together, how the hands grip the weapons, if putty is needed, etc. The devil is in those details.
MAR 11, 2017 - 10:48 AM
If they are anything like the other ICM WWl figure sets, they should go together very well.
MAR 11, 2017 - 07:35 PM
And yes, I had to order 2 sets for a dio with the FT-17. I.C.M.'s figures are the best injection molded I have seen and man do I have a lot of figure sets to go by. Also by the written accounts I have read, when American troops went into action the heavy pack was left behind at the jump off point, so a smaller pack should be used in the advance.
MAR 12, 2017 - 12:08 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT