login   |    register
Leopard Workshop [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
Leopard 1 Driver Training Cab Conversion
  • move

by: kenneth oestergaard [ KEO ]


For some years now we have had many new kits of The Leopard 1; we have also been spoiled with a steady stream of update and conversion kits which have covered most variants of this iconic cold war MBT. One version, however, has been overlooked The Fahrschulpanzer or the Leopard 1 Driver Training Cab version. Up until now the only offering has been a vacuum formed kit from a German producer, that Im sorry to admit I cant remember the name of. This kit can be made into a good model - Ive seen some which were - however, it requires a ton of work, insight and references to build.

The Fahrschulpanzer was used in the training of drivers. It was a replacement turret that gave room for an instructor and two trainees. A third trainee was placed in the driver compartment in the hull and drove the tank from there. The instructor could then monitor and advise the trainee like any other driver instructor. The instructor also had the capability to override the trainee and gain control of the tank if it was necessary. In many ways this is an adaptation of the tank similar to what driving schools do to an ordinary car, truck, bus or what we learn in.

The driving cabin, however, didnt look like a turret. To offer better sight and protection against the weather, it was issued with windows providing a full overview for the instructor. Since it was made of much lighter materials it had a base that also functioned as a ballast tank, thereby raising the weight to 8.5 tons matching that of a tank turret. Later, in some versions, a dummy gun was installed.

Leopard Club, which has quickly established itself as a provider of highly accurate detail parts for Leopard 1 and 2 tanks, has now offered their first full conversion kit with this variant. It has been in cooperation with Tom Cromwell (TGC). Tom has made a 3D CAD master for the kit; which Leopard Club has now turned into a kit with the help of LZ Models. The kit is of a Bundeswehr version with a dummy gun and air-condition. However, most Leopard 1 users have used these in different variations. The instructions sheets provide a vast range of samples to choose from.


The kit is designed with the older Italeri/Revell Leopard kits as the base kit. To some this might seem odd, but these kits are the only ones which provide the correct diameter of the turret ring. Naturally other kits, like the offerings from Takom, Meng etc, can be used. However, one would have to widen the turret ring diameter in these kits to accommodate the cabin, which I think would be a no-brainer for most.

The kit has a total of 49 parts all cast in light grey resin. My sample had a little flush here and there, which took me about 15 minutes to clean up. The quality of the casting is flawless and will satisfy everyone. The main cabin part in my sample was slightly warped but was easily fixed (the instructions actually provides help with this). The parts layout is conventional and logical I doubt anyone will be confused identifying parts during construction. The modeller needs to obtain some plastic parts to complete it, however. There are no parts for the windows themselves, so some kind of clear plastic sheets are necessary to have or buy, however, true to actual size templates are provided in the instructions. If the builder should choose to add a dummy gun, plastic parts will have to be obtained too; again, it is thoroughly described which, and how to, in the instructions.

I have only done a dry fit of the parts, but this was easy. Only a minor sanding and adjustment was necessary. During this assembly I was quite honestly amazed by the details of the parts. The amount of details will satisfy everyone, and for some (like me) it screams for a super detailing of the cabin. If one should want to do this Leopard Club have online references at Leopard Workshop Spotlight. The interior of the Fahrschulpanzer is a complex construction, however the kit is engineered so it, more or less, snaps into place by itself. In the end what you are left with is a stunner. I think this offering is a very good one for those who have longed for a Fahrschulpanzer its highly detailed, easy to build and will satisfy most right out of the box.

The instructions sheets, however, deserves extra attention in this review. It is, in my opinion, among the very best I have ever seen. It is obvious that the author of this, Michael Shackleton, has a huge insight into the subject. One is offered knowledge of the object as well as users and variants and much of this backed up by links for further information. The instruction parts themselves are in the form of pictures with number references to parts. These pictures are very clear and of a size that provide good clarity to even the smallest details. The instructions also provide advises and comments for the modellers build. These instruction sheets are worth noticing, and learn from, for many AM producers this is how it should be done.


I will not hide that I am so pleased with this kit. Firstly I have been waiting and wishing for this kit to come around for years . I think its such an interesting variant of the Leopard 1, and one you rarely see in 1/35th scale. Secondly even measured as an AM kit, this is far beyond average. Highly detailed, cleverly engineered and thoroughly instructed. Thirdly with a price tag of only 30 Euros, this is a bargain. I am simply flabbergasted! Such a pearl well done Leopard Club.
Highs: The amount of details, the instruction, the price and the object in itself, all this makes it so wonderful
Lows: The only thing I can think of is that some might find it disappointing that one has to buy additional parts to complete it. Personally, I dont think so.
Verdict: VERY recommendable absolutely a wonderful kit
Percentage Rating
  Scale: 1:35
  Mfg. ID: LW050
  PUBLISHED: Jul 19, 2019

Our Thanks to Leopard Workshop!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About kenneth oestergaard (keo)

Copyright 2021 text by kenneth oestergaard [ KEO ]. All rights reserved.


Well I'm pleasantly embarrassed! Thanks Kenneth for your kind words about the design. And Michael's instruction sheets are way beyond anything I could have done! For those wondering, the main omission is wiring - I just couldn't get 3D-printed wiring to happen due to its tiny size, so if hyperdetailing is your thing there's plenty of scope to add wires to the dashboard. You'll need two diameters of Evergreen plastic tube for the gun (specs are in the instructions) and a sheet of clear plastic as Kenneth points out - my packet of Evergreen clear 0.010" has so far served all my window needs for about a decade now, so is a modelling bargain... And yes, I'm collaborating with Michael on other goodies - details will be released in due time!
JUL 19, 2019 - 02:34 AM
What a cool alternative to simply building another Leo!
JUL 19, 2019 - 09:40 AM
Looks great and cheaper than Shapeways.
JUL 19, 2019 - 12:05 PM
Makes my old vacuform one kinda redundant. On my birthday wishlist for sure. I've used a number of LW detailing sets and have never failed to be impressed. As you say Frank, a chance to build something other than "just" another Leo.
JUL 21, 2019 - 08:29 PM
Yeah, for sure. Id like to do an Opfor Leo one day, too.
JUL 21, 2019 - 08:42 PM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move