MINIART [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
German Beer Delivery Car
Lieferwagen Type 170V German Beer Delivery Car
  • move

by: Darren Baker [ CMOT ]

Introduction

MiniArt build up it reputation with the modeller releasing a good range of figures and buildings in 1/35th scale. They have always released vehicles in small numbers, but that has really taken off in recent years with far more vehicle release than figures and there are some unusual releases in the mix as well. On this occasion we are offered a civilian vehicle by MiniArt in the form of a beer delivery wagon, or as it was known back then the grease that kept the working man going.

Review

This offering from MiniArt arrives in a cardboard tray with a card top which is robust enough to manage normal handling. Inside there is a single plastic bag containing all of the parts needed for the model and has another bag inside containing the clear parts for the vehicle and the decals; I question the choice seen her where the actual decals are facing the clear sprue and so could have easily been damaged. Also in the bag is the now regular practice of MiniArt, a card envelope with a photo etched fret inside. There are some ejector pin marks present, but these look to be hidden in most cases after assembly. There are the usual flow marks on the mouldings, but again the eye, feel and nail test did not locate any issues with these in this example.

MiniArt has gone down the route of providing an excellent engine in this offering. Looking at the instructions and parts leaves me with the belief that the engine will require some wiring, brake and fuel lines to dress this up a treat and make it a visual feast. A really nice touch here by MiniArt sees them provide diagrams for bending wire to represent the brake cables and I commend them for taking this step. Further checking leaves me with the belief that a battery will need to be added, but I am unsure of its location in this vehicle. The chassis is provided as one main moulding which is then added to; the result is a vehicle that should be easy to build and won’t trip you up due to a twisted chassis. There are some fine photo etched parts that need to be added to the chassis that will require care.

The rear suspension is a very pleasing assembly having excellent coiled spring detail; these are not workable but could be shown under load by cutting the length of the arms on parts (A14 and 15). There are photo etched retaining loops here that will require some patience on the part of the modeller and as they need to be looped I suggest using the chassis part itself or a suitable sized drill bit. The front wheel assembly suffers from my pet hate in that the wheels cannot be shown or assembled in a turned orientation. With that said the detail here is pleasing especially the twin leaf spring assembly that goes left to right rather than front to back. The vehicles exhaust has a good level of detail present, my only niggle here is that the end of the exhaust is solid and would have been better if slide moulded.

The floor of the vehicle has good detail on both faces and provides a nice area for painting the underside. Looking at the upper side and starting with the front fire wall you will find that MiniArt has provided a very nice fuel tank and even some tools that are stored on a panel in the engine bay. On the other side you will find the steering column, foot pedals, gear stick and hand brake. The instrument panel has been particularly nicely detailed with decals for the dials and clear plastic covers for them. The seat provided has a brand new appearance and is an area I would like to see roughed up a bit.

The tyres for this model have been supplied in the famous MiniArt sliced fashion. These do look good when finished, but it requires very careful clean up and assembly to get the most out of these tyres. I particularly like that effort on the spare is equally as good.

The panels of the vehicle are the area that will require the most work as regards ejector pin marks on the inner panel faces as there are some very large ones present here. I am not going to count these as a negative as they are easily accessed and a common issue with plastic models. The three doors are all designed to be open or closed with the driver and passenger door having very nice door card detail and while not mentioned in the instructions it would be easy to show the windows wound down to any degree the modeller wishes.

The radiator is another area where MiniArt has put in extra special effort with good plastic detail in all regards and is topped off with a very nice photo etched grill. The engine bay panels have been given consideration and MiniArt has provided the option of a closed or a correctly detailed open panels; I am especially impressed that the louvers on the engine panels are iopen and show especially good moulding.

MiniArt has provided four crates of beer with this offering that requires the modeller to build 4 boxes with segments to accommodate 20 bottles in each. Decals have been provided for both the boxes and the 40 bottles that are supplied in clear green and brown. I would have liked to see a few more of these in order to show a decent load in the vehicle.

MiniArt has provided some very nice finishing options with this release that could be used to add a nice splash of colour to a diorama. The options provided are:
Mainburg, Germany 1930/40
Zwickau, Germany 1930/40
Lauterbach, Germany 1940’s

Conclusion

This offering from MiniArt has a lot to offer and praise; the open louvers on the bonnet panels being especially good. I would have liked to see the front wheels have the option of being assembled turned as it is a pet hate of mine to only show them in the forward position. The decals for the beer bottles and cases are a nice inclusion that could have so easily been overlooked. The details taken as a whole offers the modeller an especially good model with some very nice colour finishing options.
SUMMARY
Darren Baker takes a look at new release from MiniArt of a Lieferwagen Type 170V German Beer Delivery Car in 1/35th scale.
  Scale: 1:35
  Mfg. ID: 35104
  PUBLISHED: Oct 17, 2019
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 85.88%

Our Thanks to MiniArt!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

Thanks for the review Darren ! It clinched it for me. As soon as it's available from my normal source in the stash it goes ! Only regrets are that the great decal options none of them match MA's earlier beer truck It will still be a great addition ! 3 out of 3 beer ratings based on subject & review !
OCT 17, 2019 - 11:51 AM
Ivan - what particular beer company did you have in mind? We might be able to work something out.
OCT 17, 2019 - 12:00 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT