REAL MODEL [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
M1127 Stryker RV
M1127 RV with Slat Armor, Blast Panels, and Rhino Anti-IED Device
  • DPP_01711

by: Pete Becerra [ EPI ]

Introduction
Deployability/mobility and lethality/survivability, that’s what the Stryker brings to the table on the war on terrorism. The M1127 Reconnaissance Vehicle is just one of the different variants in the Stryker family. Mounted with either a M2 .50 Cal machine gun or Mk19 40mm automatic Grenade launcher, crew of 2, and a 6 member scout squad, the M1127 makes a formidable weapons platform on the modern battlefield. A Long Range Advanced Scout Surveillance System (LRAS3) produced by Raytheon, is mounted on the commander's cupola next to the main gun. It is a long range multi-sensor system that provides real-time ability to detect, recognize, identify, and geolocate distant targets. Miloslav Hraban of Real Models has brought us yet another outstanding conversion kit fro the AFV M1126/M1130 Stryker in the form of the M1127 RV with slat armor, blast panels, and RHINO anti-IED device.

Set Contents
When I opened the box, I nearly fell to the floor. I’ve never seen so much photo etch in one box. Nine sheets of photo etch are in the box including the huge 3-sheet Slat Armor. Also included are the two newly released Blast Panels and RHINO Anti-IED Device photo etch sets. The resin parts consist of a replacement upper hull, commander's cupola, gun/shield mount, 24 empty 66mm M6 Smoke Discharger Systems, 12 loaded 66mm M6 Smoke Discharger Systems, 1 right side smoke discharger mount, 1 left side smoke discharger mount, 1 front smoke discharger mount consisting of 3 pieces to either mount them with or without slat armor, 4 .50 Cal ammo cans, 1 ice chest, 1 DUKE antenna mast, 7 antenna matching units, 1 LRAS3 mount, 2 carrying handles, 2 joysticks, 1 eye guard, and 1 LRAS3 main unit.

The instruction are comprised of 15 sheets. Most of the instructions look very familiar if you already built the Stryker with slat armor. Most of the instructions for the photo etch sets are in the Eduard standard format with Miloslav Real Model’s logo on them. Pictures of the built model are provided in the instructions for a guide to place the resin and photo etch parts.

Review
Now onto some key points on some of the parts. Lets start off with the upper hull. Almost no flash was present on my sample. I found two tiny specks of flash in the driver's hatch and in one of the rear air guard hatches. A new cupola is added to the hull along with removing the squad leader's hatch. The best feature about the new hull is that Miloslav added the ANTI-SLIP coating to it. The sides of the hull are left blank with out any detail so that the add-on armor can be incorporated. If you wish to build your kit with out the slat armor and additional armor, just follow the AFV kit instructions and parts to re-place the missing parts with the provided photo etch.

There are three fragile handles located on top of the commanders cupola. Two are located left and right of the hatch and one in front of the hatch. Be extra careful not to break these off or make sure they are there when you open the zip lock bag up. Also, once the pour block is removed, be sure to add the two missing bolts and washers. You have to use either the AFV kit .50 Cal or Mk19 or purchase and after-market weapon for the commanders cupola. You also have to acquire the .50 Cal ammo can holder that mounts next to the weapons cradle or a large 40mm ammo can holder from another photo etch set. The Long Range Advanced Scout Surveillance System (LRAS3) is cast very well with lots of small fine detail. The only thing that you need to add is the control and power cable with some brass wire or fine solder.

Care needs to be taken when opening the box up and pulling out the zip lock baggies. Two of my antenna matching units were broken. This will be an easy fix because they broke off clean and at an unnoticeable point. A set of Grandt Line nuts and bolts will also be needed to place at all the attachment points on the photo etch.

Conclusion
One might say that paying close to $200.00 for a conversion kit is outrages, but for a kit that comes with this much photo etch and nice clean casting is well worth the price. Many modern modelers have asked where are the kits? Slowly, model companies have heard the call, and small companies like Real Model have added to those kits already on the market by bridging the gap and giving us a chance to model the rest of the variants in a particular line of vehicles. Miloslav makes building Stryker’s look so easy and although there is a lot of photo etch and it might seem intimidating, with a little skill and a lot patience, a very convincing looking M1127 can be turned out.
SUMMARY
Highs: Anti-slip coating added to the hull is a very big plus in my book, removing the intimidation factor of trying to add your own.
Lows: Some additional items will be needed, such as the .50 Cal ammo can holder, from other sets to complete a build. Price may be out of reach for some.
Verdict: An extensive multi-media resin and PE conversion set designed to convert the AFV Stryker into an M1127 Stryker RV, it opens up possibilities for Stryker enthusiasts to add the variant to their shelf.
Percentage Rating
98%
  Scale: 1:35
  Mfg. ID: RM35124
  Suggested Retail: $190.00
  PUBLISHED: Mar 25, 2008
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.95%
  MAKER/PUBLISHER: 87.50%

Photos
Click image to enlarge
  • DPP_02301
  • DPP_02291
  • DPP_02281
  • DPP_02271
  • DPP_02261
  • DPP_02251
  • DPP_02201
  • DPP_02191
  • DPP_02181
About Pete Becerra (Epi)
FROM: TEXAS, UNITED STATES

I am 48 years of age. I have been modeling since I was around 8 years old. As you can see from my signature, I am retired from the US Army and Texas Army National Guard. I served 6 years in active duty from 1989 to 1995 and in 1998 I joined the Texas Army National Guard and been serving up unt...

Copyright ©2021 text by Pete Becerra [ EPI ]. All rights reserved.



Comments

Now this is what I have in mind when I talk about wanting to get an RV! And the wife thinks I mean a Winnebago. -YL
MAR 24, 2008 - 01:56 PM
I found this thread on another web sight and I'm not sure if they are showing that there was a gap here or something else. If some one can translate what they are posting, we can be for sure. Another M1127 In-Progress Build But just in case if they are saying that there is a problem in the fit of the Real Model hull to the AFV hull, I started to build mine and I had no problem with fit or gaps. You can see here that there was a good fit and no gap was present. As you can see here, I did have to add some putty under the hull where the pour block was removed and the upper hull met the lower hull. I know that Milo already showed us his in -progress shots of this kit before he placed it on the market, but i wanted to start a build blog from an average modeler like myself. So stay tuned and I will start a thread and show such things that I have here.
MAR 24, 2008 - 05:10 PM
I will certainly stay tuned. I got to see the Real Model LAV III in person at the LHS this weekend and it looked great. Looking forward to your blog Pete. -Matt
MAR 24, 2008 - 06:17 PM
Yeah go Pete, Mine should be waiting in the mail box for me, I look forward to your progress as well. Good luck Bill
MAR 24, 2008 - 10:44 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • DPP_02241
  • DPP_02231
  • DPP_02221
  • DPP_02211
  • DPP_02141
  • DPP_02131
  • DPP_02121
  • DPP_02111
  • DPP_02061
  • DPP_02031
  • DPP_02021
  • DPP_02011
  • DPP_01981
  • DPP_01931
  • DPP_01921
  • DPP_01891
  • DPP_01881
  • DPP_01861
  • DPP_01841
  • DPP_01831
  • DPP_01811
  • DPP_01781
  • DPP_01751
ADVERTISEMENT