login   |    register
Legend Productions [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
M134 Minigun
M134 Minigun ( 2 for US vehicles)
  • move

by: Anirudh Arun [ ANIRUDHARUN ]

History and Design

The M134 is a 6 barrel, air cooled, electrically powered heavy machine gun that fires the standard 7.62x51mm NATO round. The US army had been experimenting with multi-barrel machine guns for use in Vietnam. Helicopter crews had complained that using a single barrel weapon to repel enemies often led to jams and overheating.

To solve this problem, General Dynamics scaled down the M61 Vulcan to fire the 7.62mm round. Originally the specifications listed a maximum fire rate of 6000 rounds per minute, but this was later lowered to 4000 rpm. The weapon was adopted into the US arsenal in 1962 and used on everything from the OH-6 Cayuse to the A-1 Skyraider under its Air Force designation of GAU-2/A.

The basic weapon has been improved since its introduction and the current version is produced by Dillon Aero Inc. Currently the weapon is still used on helicopters, but a few examples have been mounted on Humvees.


This new kit is a vast improvement over Legend Productions original release, LF1038 which lacked the ammunition belt and box and represented an older Vietnam era weapon. This version represents the latest version of the M134 and has enough pieces for 2 weapons. The new kit contains:

Barrel x 2
Motor x 2
Gun Control Unit x 2
Handles x 2
Gun mount x 4
Ammo box x 2
Ammo belt x 2
0.5 mm Brass wire

The parts are packed in the standard Legends box, and in my example all parts were intact. The parts are very well cast with no air bubbles present on any of the pieces. The detail on the ammunition belts is especially well done and is very realistic.

There are no instructions in the conventional sense. Instead there are a few clear colour photos showing the gun and some of its sub-assemblies from different angles. All the parts are clearly labelled so there should be no ambiguity when assembling the pieces.

the kit

Comparison between the resin pieces and photos on the Dillon Aero website show that the Legends offering is complete and accurate. All the resin pieces are still attached to the pour plugs so care should be taken when removing them, especially with the ammunition belts.

The barrels and flash suppressor are cast as one piece with each individual barrel clearly visible.

The Gun motor, Clutch and improved Dillon Aero Delinker are also cast as one highly detailed piece and only requires a few wires to complete it. For this purpose, Legends have supplied a length of 0.5mm brass wire. I would recommend drilling out the location holes for the wires so they sit properly.

The spade grip is made up of 1 photo etched piece and 2 resin handles, so again care should be taken to align the handles correctly. The gun control unit is also attached to the spade grip and is another detailed part with a locating pin to allow proper alignment within the spade grip.

The gun mount, ammo belt and ammo box are all cleanly cast and are accurate representations of the real parts. However the ammo belt may need to be heated to be bent to the required shape which may lead to a loss of details on it.

The only painting guide is the photo on the box which gives a good idea of the basic colours, but it may be useful to consult references to accurately paint the weapon.


Overall the Legends kit is a very complete and accurate representation of a widely used weapon which will find many uses for both armour and aircraft modellers. Additionally the kit is a vast improvement on the original Legends release.
Highs: A very detailed set with no casting blemishes. A useful kit that has not been released with this level of detail before.
Lows: Care needed when removing and bending the ammo belt. Spade grip will require some careful alignment.
Verdict: An excellent kit that will prove useful to both armour and aircraft modellers. Some parts of the assembly may prove difficult for beginners but a sound kit nevertheless.
Percentage Rating
  Scale: 1:35
  Mfg. ID: LF12A4
  Related Link: M134 (Legends website)
  PUBLISHED: Apr 16, 2011
  NATIONALITY: United States

About Anirudh Arun (Anirudharun)

Copyright 2021 text by Anirudh Arun [ ANIRUDHARUN ]. All rights reserved.


Thanks for putting this up, James Anirudh
APR 15, 2011 - 11:50 PM
Thanks for the review. Anyone know where I can get this that ships to europe?
APR 20, 2011 - 09:57 PM
LuckyModel is a good option (free shipping ) : http://www.luckymodel.com/scale.aspx?item_no=LF12A4 PS : welcome to Armorama ! HTH Frenchy
APR 20, 2011 - 10:14 PM
Yup, Luckymodel is where I got my set from, but if you don't want to wait for such a long time for the item, friendship models in the UK stocks the Legends range. http://eshop.friendshipmodels.org.uk/ Anirudh
APR 21, 2011 - 07:36 AM
For those in the US, check with Sprue Brothers.
APR 21, 2011 - 07:41 AM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move