MIG PRODUCTIONS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Doric Greek Temple

by: Pawel Krupowicz [ VODNIK ]

When I received a package with review samples from MIG Productions I was very surprised by the weight of it. Of course I knew that resin sets are much heavier than plastic kits, but the weight of the box was surprising anyway. Only when I opened the box I discovered the cause of this phenomenon. In the box, among other samples, was the "Doric Greek Temple" set and this is really one heavy product. So beware if you plan to mail order it - because of the weight the shipping cost may be much more than you are used to pay!

The set comes in the plain white cardboard box, which is about the size of typical smaller1/35 kit, but in the resin aftermarket sets world it means a really large box! The approximate dimensions of the box are (W x L x H) 9.25" x 12.75" x 2" or 23.5cm x 32.5cm x 5.5cm and the weight is hefty 1.1 kg (over 2.4 lb). On the box lid is a label with photos of assembled and painted set. The scale information on the box suggests that the product is suitable for both 1/35 and 54mm (1/32) scale dioramas. Some suggested geographical locations for dioramas in which the set can be used are listed and include: Libya, Lebanon, Sicily, Italy, Greece and Tunisia.

Inside the box we get one large triangular base made of plaster (9.5" x 5.75" or 24cm x 15cm), two complete columns (6.5" / 16.5cm high excluding top plates), six pieces of damaged columns and a two piece section of the roof. Except for the base all other parts are cast in gray "stoned resin" - it looks a bit like a resin mixed with sand. No instructions are provided, but they're not needed. All one needs to do to assemble the set is to saw off the resin casting blocks and glue parts together. It is up to the modeler to decide how to put parts together to match the diorama design. I was afraid that "stoned resin" may be difficult to cut and saw, but it is actually as easy to work with as any standard resin. The only problem may be finding a good way to join heavy resin columns to plaster base. I assume that resin parts should be easy to cement with CA or epoxy glue, but these may not work well with plaster. Particularly if one plans to use the quite heavy roof section on top of the column it becomes essential to make sure that the column is well secured to the base. I suggest drilling a hole in the base and in the column bottom and using some kind of pin to hold parts together.

I have not noticed any air bubbles or other blemishes on parts, but even if there are any, the nature of the set makes them unimportant. After all parts are damaged by design.

My knowledge of ancient architecture is almost non existent, so I cannot comment on accuracy of the set. It is called a Doric Greek Temple and a quick Google search for this name gave me several photos of real temples with very similar design of columns and roof. The only thing that I noticed is that while details seem to be accurate, the proportions may not be so. Real Doric columns are usually wider and bulkier. MIG columns seem to be too slim. But honestly speaking I doubt that anyone, save archeologists and architects, would notice this problem. If it really is a problem - maybe some Doric temples indeed had more slim columns?...

FINAL VERDICT
This is very interesting product, although with somewhat limited appeal. Doric temple is not a universal background and many modelers may find it difficult to imagine scenario in which such structure would fit. But if you have an idea for such diorama, the MIG set is what you need. It is easy to use and well cast. Recommended!

Many thanks to Miguel Jimenez of MIG Productions for the review sample!
SUMMARY
Percentage Rating
80%
  Scale: 1:35
  Mfg. ID: 35103
  Suggested Retail: €49
  Related Link: MIG Productions website
  PUBLISHED: Jan 24, 2005
  NATIONALITY: Greece / Ελλάδα
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 82.20%
  MAKER/PUBLISHER: 86.99%

About Pawel Krupowicz (Vodnik)
FROM: WARSZAWA, POLAND

As first lines of this bio appear under all my reviews, I feel it is important that I start with this information: In March 2005 I ventured into the other side of modeling "industry" - I was not only building model kits, but also helping design them as a consultant for Dragon Models Ltd.. These days...

Copyright ©2021 text by Pawel Krupowicz [ VODNIK ]. All rights reserved.


   
ADVERTISEMENT


Photos
Click image to enlarge
  • 35-103-00
  • 35-103-01
    Contents of the set.
  • 35-103-02
    Close-up of some resin parts.
  • 35-103-03
    I put the 1/35 scale Ford M151A1 model on this photo to better show the size of MIG set parts.
ADVERTISEMENT