BRONCO MODELS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Carro Armato L35
Carro Armato L35
  • move

by: Vitor Costa [ VITORCOSTA ]

History

The L3/35 was a lightly armoured two-man vehicle typically armed with twin 8 mm machine guns, though variants were developed with other armament.
The vehicle's commander/gunner sat on the left and the driver sat on the right. Other than the number and type of machine guns, the differences between the L3/35 and the L3/33 were few. Both featured riveted and welded construction.

Introduction

For many years I have heard opinions on Bronco kits, I have never built any or ever owned one, so I was a little bit curious about this offering from Bronco Models. To be honest I was not very excited about the vehicle itself as I didn't have any interest in these tiny Italians vehicles, so looking at the box art I was not expecting anything “special”. Fortunately on the box side there are two profile drawings and then my interest for this kit suddenly changed. Don’t judge a book by its cover, they say… and in this situation that is the case.

This is a huge box for such a small kit, I thought and I was right, there is enough space to put at least two of these kits inside, but despite being such a small kit I was surprised and impressed with the number of parts that I found inside of this box.

Kit Contents

5 plastic sprues
1 clear sprue
1 P.E. fret with 6 parts
Decals for two variants

Review

The kit is composed of 6 sprues, one being the clear parts, and we only find the two front lights on there. These two parts are really well represented and we can easily see the lens effects of the lights. This sprue is inside of a plastic bag as are the 4 bagged except for the ones for the suspension that are identical and so are bagged together.

Here we find the tracks (sprue A), these must be the smallest tracks I have seen till now. These tracks are link and length with individual links for the curved areas. There are no marks what so ever, so there is no need to fill those annoying ejector pins marks that can be found in some kits. These parts have good detail, but they could be better, the guide horns are a little to thick, looking at these parts I think it would be easy to improve their appearance.


On this sprues only a couple of the parts show mould seams, but they are going to be hidden and are also going to be easy to remove the lines so will not be noted once in place. That is the only “flaw” I could see, all of the other parts have a very good level of detail, and there isn’t any flash or ejection pin marks visible. The details however could be sharper in some cases. You will find a reasonable number of tiny parts that are going to need some attention to be removed from the sprues, in some cases if too much glue is applied on the build process these parts are going to be ruined as they will likely melt.

The next sprue to be observed was sprue B, here we find mostly the parts to be used on the hull and nearly half of it is not to be used on this version. On this sprue the level of detail looks better, sharper and crisp details can be found on all of the parts; however some parts show some flash that is really thin, it can be easily removed with a finger nail, or even better with a sand paper. There are plenty of ejection pins, but these are all in places that can’t be seeing once in place. There are some holes and fitting locations for what may be a version with an interior.

The E sprue provides the parts for the upper hull. The level of details is the same as that found on the B sprue. Looking to the biggest part we easily note the lack of rivets making this the welded version, since all of the reference pictures I found on the internet show lots of rivets in this area. Once more half of the parts on this sprue will be not used on this version. A really nice touch is the fact that some parts are thinner than others, this will make a huge difference if we desire to display the hatches/doors open, this can be seen on the fenders, where the plastic is really thin, it will look good and it will be easy to bend it if we want to represent some damaged areas. Some tiny parts are present here too. No ejection pins will be seen once in place.

The last sprue is the F. Here we will find some doors and more of those really small parts. The gun barrel is well represented from plastic.

There is a fret of photo etched parts with no more than 6 parts in total. The decals look good, unfortunately two of the 4 flags don’t have the 3 different colours aligned, a small cut with a hobby knife will solve the problem.

The instruction booklet is printed in full colours with 12 pages. It will be easy to follow, many sub-assemblies are composed of no more than 2 parts, so there is no complex building stages at all. Only four views on the paint instructions

Conclusion

This kit will certainly benefit with the addition of an interior, it’s a small kit, there will not much to do, but it will make all the difference since there are many doors that can be left open, all the doors have nice details on the interior and don’t need any filler or work to be shown. I’m sure there will be lots of extra parts to make it look even better, the gun barrel and the tracks are some that I can easily remember, but the aftermarket makers will find much more.
I’m looking forward to building this kit, from ugly to beautiful in 20 minutes.
It looks like the Formula 1 of the WWII Italian tanks!
SUMMARY
Highs: Originality of the subject, good details. No pin marks can be seen once the parts are in place. Only a few parts have flash present, this will be really easy to remove.
Lows: Some parts are really small and hard to remove from the sprue, maybe these should be represented in p.e. The interior is “missing”. Tracks could be better.
Verdict: This kit will look amazing once built, being a small one there is plenty to play with and it will be easy to apply lots of weathering effects. Maybe a risky bet from Bronco since it’s not a very well known vehicle, but I'm sure it will catch the attention
Percentage Rating
85%
  Scale: 1:35
  Mfg. ID: CB35049
  PUBLISHED: Oct 20, 2016
  NATIONALITY: Italy
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.50%
  MAKER/PUBLISHER: 87.97%

Our Thanks to Bronco Models!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Vitor Costa (VitorCosta)
FROM: LISBOA, PORTUGAL

I build models since i was 7. I like all the different type of models i already have build almost every thing there is to build but my favourite is the aircrafts, mainly 1/48, i build many 1/72 since i still do commission work. After 25 years i return to the AFV's too.

Copyright ©2021 text by Vitor Costa [ VITORCOSTA ]. All rights reserved.



   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT