Built Review
Pz. III/IV Working Track Links
Pz. III/IV mid version 40cm workable track links
  • move

by: Russ Amott [ RUSSAMOTTO ]


I received a Tamiya Pz. IV H early version for Christmas and decided to add some aftermarket improvements to the kit. After going with the full Voyager photo etch set I reviewed on this site earlier I realized that the vinyl tracks just wouldn't do. Fortunately Tristar has come to the rescue with a box kit of aftermarket tracks that will work out just right.


The set is the Panzer III/IV 40cm mid version workable track link set. The front of the box has the title and the rear has the instructions and paint call out. The instructions show to click the links together and indicate no glue is needed. Paint colors are indicated for Tamiya and GSI Creos Mr Color/Aqueous Color in Metallic Gray. Pretty simple.

Inside the box there are four identical orange/tan colored styrene sprues, each containing 36 each of left and right handed track links, attached to the sprue by two connector tabs. This gives you a total of 144 links of each, providing plenty of spares, which is a very nice bonus. Detail of the track links is very nice, with varying amounts of flash on the tracks in the sprocket holes, which is easy to clean up.

the links

Removal of the individual links is very easy as the plastic is soft and easy to cut. Once cleaned up the links are designed to snap together and be held by friction. There is a small bump on the inner mating surface on each link, and a corresponding indent on the opposite mating surface. Some of the links I assembled held together just fine, but others were very loose, so a little glue will be needed to hold them all together.

I compared them to the Dragon Magic Tracks I have on hand from a StuG III and they match up very well in size and detail. They fit the Dragon StuG drive sprocket just fine but on the Tamiya Pz IV sprocket the fit was a little tight. I had to trim the drive tooth holes on the individual tracks to get them to set nicely.

As far as assembly goes, each track pad has to be removed and cleaned up individually, but once done they click together with no trouble. They were quite easy to work with, requiring only a little patience. Because of how they click and hold they may be easier to assemble for those who are new to individual tracks.


I purchased my set from Lucky Model for about $10.00 US, but they can be had from many other retailers as well. If you are looking to replace your vinyl tracks with individual track links this set provides an excellent option.

Tamiya Pz.IV Early Review

Voyager PzKpfw.IV Ausf H Upgrade Set Review
Highs: This is a very simple set of individual track links that are easy to clean up and assemble. The price was excellent.
Lows: Some flash on the links. You may have to trim the links to fit the drive sprocket depending on the kit. Will require some gluing.
Verdict: Overall I think this is a great product and a great value.
Percentage Rating
  Scale: 1:35
  Mfg. ID: 052
  Suggested Retail: $10.00 US
  PUBLISHED: May 10, 2010

About Russ Amott (russamotto)

I got back into the hobby a few years back, and wanted to find ways to improve, which is how I found this site. Since joining Armorama I have improved tremendously by learning from others here, and have actually finished a couple of kits. I model to relax and have fun, but always look to improve. ...

Copyright 2021 text by Russ Amott [ RUSSAMOTTO ]. All rights reserved.


Thanks, Russ, very helpful review, especially the photos showing them installed on the drive sprockets. And no knock out pins on the links, unlike the Dragon Magic Tracks--very nice!
MAY 09, 2010 - 06:33 PM
thanks! another one to the plastic AM tracks did you get a spacer to the sprocket (sometimes there is a a difference between track width and sprocket width)?
MAY 09, 2010 - 10:33 PM
James, thanks for posting this and providing the links to the other reviews. Matan, I just placed the tracks straight to the sprocket. I have a ways to go on the Tamiya Pz. IV and didn't test fit the sprocket with tracks against the hull, but on the StuG, there was no problem at all.
MAY 11, 2010 - 09:39 AM
Thanks Russ,these look pretty nice.Will they fit an Afrika Corp III-G ?
MAY 14, 2010 - 10:24 AM
Panzer III A-G and Panzer IV A-D used the 36cm track, at least from what I have been able to find.
MAY 14, 2010 - 11:44 AM
nice set might have to get a few of these, tristar's panzer IV wheels set added some much needed detail too some of my older panzer IV kits, glad they've released the tracks to go with but my one question is will they be releasing the 36cm for the earlier panzer III's and IV's? as i've got quite a few early variant's of these tanks.
MAY 15, 2010 - 09:28 PM

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move