Built Review
Lenses and taillights for AAVP
Lights for the 1:35 AAVP7/ LVTP7 family
  • move

by: Andy Renshaw [ SKYHAWK ]


One of the simplest and yet most striking details one can add to a model is good looking lighting. Be in the front or rear, good-looking lights can really make a good model look fantastic. There are a lot of techniques out there, but here is a little set that makes this task much easier, and with fantastic results.

the set

SKP has been producing some interesting sets that are a combination of photo-etched metal and resin that make for some extremely realistic lenses for AFVs. This set covers the AAVP7 and LVTP7. The set is only marked for the AAVP, however enough lenses are included to do either type. On the set you get four clear headlights, two IR lights, a tail light, and a lens for the searchlight. No instructions are given, so it is up to the modeler to find references and figure out which should be used.

Since the size is similar on the Taymia, Academy, and Hobby Boss offerings, Iím fairly certain that these could be used on any of models available. For the AAVP, you will use all four clear lights, plus the taillight and search light. The LVTP, with its distinctive round hull cutouts for the headlights, will use two clear headlights, two IR lights, taillight, and searchlight if you choose.

Modification of Kit Parts:

On the HB and Taymia kits, the lenses are molded solid with the rest of the headlight assembly. I first center-punched a small hole in the center of each molded lens and then drilled out the molded lenses with progressively larger drill bits. Once drilled out, you can either glue in the SKP lenses and mask them for painting, or paint the model and install them afterwards. Either way the result is quite stunning.

Do be gentile with the SKP lenses, as the clear resin is actually somewhat soft and rubber like, and damage could ensue if scraped or pricked with a metal tool. Replacing the searchlight lens follows a similar technique.


Overall, a great set that adds quite a bit of life to the kit parts! Many thanks to SKP and Armorama for the review sample.
Highs: Easy to use and look fantastic.
Lows: Soft, rubbery resin used for clear portions.
Verdict: Highly recomended for that extra touch of detail.
Percentage Rating
  Scale: 1:35
  Mfg. ID: SKP 135
  Suggested Retail: 6,40 Euro
  PUBLISHED: Oct 08, 2011
  NATIONALITY: United States

Our Thanks to SKP Model!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Andy Renshaw (skyhawk)

I started modeling around 8 years old when my dad bought me a Monogram 1/48 A-7. We built that together, and after that he turned me loose. Along with armor and figures, I also enjoy building aircraft and trains (model railroading), and tend to cycle between the genres. Recently married, I have...

Copyright ©2021 text by Andy Renshaw [ SKYHAWK ]. All rights reserved.


Click image to enlarge
  • move
  • move
  • move
  • move