Built Review
Wheels for Citroen 11CV
Replacement Wheels for CitroŽn 11CV (4 wheels), SKP Model, 1/35
  • move

by: Stefan Halter [ DANGEROO ]


Some years ago, Tamiya released a 1/48 scale model of the ubiquitous CitroŽn 11CV ďTraction AvantĒ which was followed shortly after by an up-scaled and more detailed 1/35 scale kit. Now SKP Model bring us a set of replacement wheels.

The Traction Avant was produced for over 20 years from 1934 to 1957. It was one of the first cars to have front wheel drive (French: ďtraction avantĒ), which gave it great characteristics on the road and was so novel, that the car was usually simply called ďTraction AvantĒ. It was used by the French Army and later also adopted by the German Army. Many still survive today in collections around the world.


The set consists simply of the four wheels to replace the kitís wheels. They are of a different type than the Tamiya wheels, both narrower and with a different rim type. There are several rim types evident from photos. I assume that the wheels provided in the Tamiya kit are a more sturdy military type, while the replacement wheels are of a more delicate civilian type. There are two types of similar design evident from photos, one with long lightening holes along the edge and the other without. The replacement wheels are of the latter type. They conform well to pictures of the originals and seem to be the more common type of wheels for the civilian version, especially with regard to the width.

The wheels have nice detail, from the embossing on the tire to the delicate tire pattern. The resin sprue is easily removed and of course somewhat compromises the detail in that section of the tire pattern. This is however no problem as you will just have to make sure that part is on the side of the wheel touching the road. There is no bulging to simulate the weight on the wheel, and I donít know if this can be changed with resin wheels. Maybe someone can recount his experiences with this?

Construction is very straightforward, with the wheels simply replacing the kit wheels and sliding over the axle. No construction is needed, and the fit to the kit axle is perfect. There is no provision for the wheels to turn (such as the poly cap in the kit wheels), however, the axle is not fixed and the wheels can be turned for ease of painting.


A simple, yet effective, update. Highly recommended!
Highs: Great molding, nice details, easy to use
Lows: none, but some will not like the lack of bulging to simulate weight on the tire
Verdict: Highly recommended
Percentage Rating
  Scale: 1:35
  Mfg. ID: SKP195
  Suggested Retail: 7.69 EUR
  PUBLISHED: Jul 17, 2013

Our Thanks to SKP Model!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Stefan Halter (Dangeroo)

I'll build just about anything military related that gets my interest, though most of it is 1/35 scale WWII Allied.

Copyright ©2021 text by Stefan Halter [ DANGEROO ]. All rights reserved.


Great review thanks. I think the wheel rim type has more to do with the specific production variant. I'll have to check my reference books when I'm back home. Cheers, Christophe
JUL 18, 2013 - 07:22 PM
AFAIK, the Traction-Avant could be fitted with 3 types of wheel rims at the factory : 1) the rim called "Stop" : it was the original rim (it's the one replicated by SKP) which had a chromed hub cap. 2) the "Pilote" rim : it appeared in 1937. It was lighter than the Stop but much more fragile... 3) the "BM" rim (=Brevet Michelin) that ressembled the "Stop" is a postwar type (1947). Of course, the TA could be fitted with AM rims as well... HTH H.P.
JUL 19, 2013 - 12:37 AM
I'm looking at a pic of a 1936 TA with a young woman dressed well,with a fur and a pillbox veiled hat, about to get in her car. Next to her are two suitcases waiting to be loaded. The wheels on this car are the same as shown on the Tamiya kit. Perhaps this is another type to be added to the list Frenchy provided? Anyway, it seems that the wheels provided in the kit may be okay for a civilian version. Maybe they were optional, being stronger, than the lighter disc type OE wheels. Arthur
SEP 03, 2013 - 05:07 AM
Hi Arthur I guess this is the picture you're talking about The pictured model (the 4-wheel one...) is a restored 1936 7 CV Traction-Avant fitted with "Pilote" wheels which appeared in october 1937). Those are indeed the ones in Tamiya kit, but they were more fragile than the earlier "Stop" wheels pictured below : H.P.
SEP 03, 2013 - 05:47 AM
Dang, Frenchy--You are one heck of a repository of knowledge. Guess when the French found the Germans were going to take all their TA's for staff cars, they quickly installed the weaker wheels, and put the stronger ones away for after the war!!
SEP 03, 2013 - 06:54 AM

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move